Cisco WS-C3560X-24T-L Command Reference - Page 135
dot1x reauthentication
View all Cisco WS-C3560X-24T-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands dot1x reauthentication dot1x reauthentication Use the dot1x reauthentication interface configuration command to enable periodic re-authentication of the client. Use the no form of this command to return to the default setting. dot1x reauthentication no dot1x reauthentication Syntax Description This command has no arguments or keywords. Defaults Periodic re-authentication is disabled. Command Modes Interface configuration Command History Release 12.1(19)EA1 Modification This command was introduced. Usage Guidelines You configure the amount of time between periodic re-authentication attempts by using the dot1x timeout reauth-period interface configuration command. Examples This example shows how to disable periodic re-authentication of the client: Switch(config-if)# no dot1x reauthentication This example shows how to enable periodic re-authentication and to set the number of seconds between re-authentication attempts to 4000 seconds: Switch(config-if)# dot1x reauthentication Switch(config-if)# dot1x timeout reauth-period 4000 You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC command. Related Commands Command dot1x re-authenticate dot1x timeout reauth-period show dot1x [interface interface-id] Description Manually initiates a re-authentication of all IEEE 802.1x-enabled ports. Sets the number of seconds between re-authentication attempts. Displays IEEE 802.1x status for the specified port. 78-16405-05 Catalyst 3560 Switch Command Reference 2-103