Cisco WS-C3750X-48PF-L Hardware Installation Guide - Page 78
Rack Mounting
View all Cisco WS-C3750X-48PF-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installing the Switch Rack Mounting Chapter 3 Switch Installation Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: • This unit should be mounted at the bottom of the rack if it is the only unit in the rack. • When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. To install the switch in a 19-inch or 24-inch rack (24-inch racks require optional mounting hardware), follow the instructions described in these procedures: • Removing Screws from the Switch, page 3-19 • Attaching Brackets to the Catalyst 3750G-24TS Switch, page 3-20 • Attaching Brackets to the Catalyst 3750-24TS, 3750G-24T, 3750G-12S, and 3750-48TS Switches, page 3-25 • Mounting the Switch in a Rack, page 3-28 • Attaching the Cable Guide, page 3-30 Note Installing the switch in a 24-inch rack requires an optional bracket kit not included with the switch. You can order a kit containing the 24-inch rack-mounting brackets and hardware from Cisco. For the Catalyst 3750G-24TS switches, order part number RCKMNT-3550-1.5RU=. For the Catalyst 3750-24TS, 3750G-24T, 3750G-12S, and 3750-48TS switches, order part number RCKMNT-1RU=. 3-18 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02