Cisco WS-C5500-WCTX Installation Guide - Page 12
Installing the Controller on a Desktop or Shelf, Installing the Controller in a 4-Post Rack
UPC - 746320056319
View all Cisco WS-C5500-WCTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Unpacking and Installing the Controller Installing the Controller on a Desktop or Shelf When mounting the controller on a desktop or shelf, attach the rubber feet in the four circular marks near each of the corners on the bottom of the controller chassis, and place the chassis on any secure horizontal surface. Installing the Controller in a 4-Post Rack Caution The controller weighs 20 lbs (9.1 kg) with both power supplies installed. Two or more people must work together to install the controller. Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028 Follow these steps to mount the controller in a 4-post equipment rack: Step 1 Attach one of the front brackets to the controller using three M4 screws (see Figure 4). Follow the same steps to attach the second bracket to the opposite side. Note Only three of the four holes on each bracket are used (top, left, and right). Figure 4 Installing the Front Brackets RP SP USB0 USB1 CONSOLE EN EN Cisco 5500 Series Wireless Controller 12 34 56 78 Model 5508 PS1 PS2 SYS ACT 1 Front bracket 12 2 M4x0.7 x 8mm flat head screws 251200 Cisco 5500 Series Wireless Controller Installation Guide 12 78-18998-01