Clifford SuperNova 2 Owners Guide - Page 19

Feature Factory setting # of momentary presses Secondary action Program completion confirmation Result Add a new remote to channel 2 (optional - remote accessory) Add a new remote to channel 3 - (silent arm/disarm) Add a new remote to channel 4 (optional - remote accessory) Erase all channels - Valet code Set channel 4 timer D 30sec. 12 Press remote control button 2 2 chirps Button 2/channel 2 code of the new remote control has been memorized Button 3/channel 3 code of 13 Press remote control button 3 3 chirps the new remote control has been memorized Press remote control button 4 14 of the optional 4-button/12-channel ACG 4 chirps remote control Button 4/channel 4 code of the new remote control has been memorized All remote control codes 15 - 2 chirps have been erased; program in new remote control(s) See Setting your own secret valet code on page 12. 17 When the desired interval has passed, turn off the ignition key 1 chirp Timer has been set to the interval of your choice between 1sec. and 2min. DWARNING: If the built-in timer controls window/sunroof closure on your vehicle, DO NOT change the timer setting! This requires installer-only programming. Example : To change the AutoArming feature from its factory setting of "on" to "off," you would do the following: • Turn the ignition key to the ON position. • Enter your valet code, then immediately tap and release the momentary side of the PlainView switch 4 times (you'll hear a chirp each time you press to help you count to the total of 4 chirps). • Wait 3 seconds. The system will sound one more chirp to confirm that the AutoArming setting is now off (1 chirp = off, 2 chirps = on). • Turn the ignition off. That's all there is to it! To change the AutoArming setting back, just repeat the procedure. 18