Cobra 19 MINI AMFM 19 MINI Manual - English - Page 6
Operation
View all Cobra 19 MINI AMFM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Operating Your CB Radio Intro Operation On-Off/Volume Knob Notice Installation Operation Customer Warranty TAussirstanncieng on Your CB Radio Push and release the Vol/ON/OFF knob to power ON the radio. Customer Assistance Secondary Icons On-Off/Volume Knob Notice Caution Warning Volume Rotate the channel knob left or right to adjust the volume. Notice Channel 9/Channel 19 Button Channel 9/Channel 19 Set CH 9 to obtain instant access to the emergency channel.Set CH 19 to obtain instant access to the information and calling channel. Channel 9/19 access: 1. Push and release the Channel 9/19 button to quick select channel 9. 2. Push and release the Channel 9/19 button a second time to select channel 19. 3. Push and release the Channel 9/19 button a third time to return to the last used channel Adjust Squelch 6 English Squelch This control is used to cut off or eliminate receiver background noise in the absence of an incoming signal when properly adjusted. To squelch your radio: 1. Push and release the SQ/ASQ button. 2. Rotate the Channel knob to set the desired squelch level. 3. Push and release the SQ/ASQ button to save the setting. Installation y Icons Operating Your CB Radio Operation Main Icons Main Icons Adjust Squelch Auto Squelch The Auto Squelch (ASQ) feature can help to improve the receiver performance experience when enabled for communicating with nearby stations. For weaker or more distant stations consider using the SQ (traditional squelch) system or disable squelch for continuous receiver audio. To auto squelch your radio: 1. Push and hold the SQ/ASQ button until "AQ" shows on the LCD display. The ASQ level set will also show in the lower left side of the display. 2. Rotate the Channel knob to set the desired squelch level. 3. Push and release the SQ/ASQ button to save the setting. On-Off/Volume Knob Squelch/ASQ Button Operating Procedure to Receive Be sure the power cord, antenna and microphone are connected to the proper connectors before proceeding further (see pages 4 and 5). To receive: 1. Turn ON the radio. 2. Select the desired channel. 3. Set squelch to OFF (audio noise heard from speaker). 4. Set the receiver volume to a comfortable listen level. 5. Reset the squelch level for the intended listening requirements. Press-to-Talk Switch Operating Procedure to Transmit Be sure the antenna is properly connected to the radio before transmitting. Prolonged transmitting without an antenna, or with a poorly matched antenna, could cause damage to the transmitter. To transmit: 1. Select the desired channel. 2. The receiver and transmitter are controlled by the Push-to-Talk switch on the microphone. Press the switch and the transmitter is activated; release switch to receive. When transmitting (on a clear channel), hold the microphone two inches from the mouth and speak clearly in a normal voice. 7