Cobra 25 WX NW ST User Manual - Page 10

25 WX NW ST Manual 3.3 6/15/99 1:10 PM Page 18 Operation Operation To Transmit To Transmit Caution! Be sure the antenna is properly connected to the radio before transmitting. Prolonged transmitting without an antenna,or a poorly matched antenna, could cause damage to the transmitter. Be sure to read the F.C.C. Rules and Regulations included with this unit before transmitting. 1 Select desired Transmit Transmit channel. 1 Push and hold mic button to transmit. Transmitter is now activated.When transmitting, hold the microphone two inches from your mouth and speak in a clear, normal voice. Release to receive. 18 RF Meter This meter swings proportionately to the RF output (outgoing signal) while transmitting. RF Meter External Speaker The external Speaker jack is used for remote receiver monitoring. 1 Connect an external speaker to the external speaker jack on the rear panel. External Speaker Note The external speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts. When the external speaker is plugged in,the internal speaker is automatically disconnected. Note Cobra external speakers are rated at 10 watts.See Accessories page 39. 19