Cobra XRS 970 Owners Manual - Page 6
Programming User Modes
View all Cobra XRS 970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Your Detector EasySet Programming EasySet Programming • All user mode settings on your detector can be changed by using Program mode. When changing the settings, please keep in mind: I Buttons can have multiple functions. I All settings will be stored in memory when the power is turned Off and recalled when the power is turned back On. The procedure for using Program mode is shown on page 7. NOTE You cannot enter Program mode during an alert. The unit will not detect signals while in Program mode. During programming, if no buttons are pushed for ten seconds, the unit will automatically exit Program mode and save the last settings. Programming User Modes The tables on pages 8 through 9 show you how to program all user modes and the settings you can choose from. NOTE On the following pages, you will find more detailed explanations of each setting. See page 15 for instructions on setting the IntelliMute activation point. See page 18 for instructions on calibrating the compass. See page 23 for instructions on using SmartPower. 6 English Your Detector EasySet Programming To Use Program Mode Press and hold the Program/Mute button for two seconds. Tone Three beeps Set/City Button Press and release Select/Dim Button Press and release Program/Mute Button Press and hold/Press and release Visual Display Voice Program will appear. Start Program PROGRAM Then brief programming instructions will scroll through the display three times. While the programming One beep As each mode is displayed, None instructions are scrolling, with each the current setting for that press and release the button press mode will be shown. Select/Dim button to cycle through the user modes. With the user mode you wish to change displayed, press and release the Set/City button to change the setting. To move to the next selection, press the Select/Dim button again. One or two beeps, depending on your selection The setting you select will be shown. Current setting When you have finished programming any or all of the user modes, press and release the Program/Mute button to exit Program mode. Or simply wait ten seconds without pushing any buttons. One beep When you exit Program mode, Exit Program the new setting will automatically be saved and EXIT PROGRAM and Settings Saved! will appear. EXIT Settings PROGRAM Saved! Nothing Comes Close to a Cobra® 7