Coby CX CD400 User Manual - Page 8

WARNING 1. TO PREVENT FIRE OR SHOCK HAZARD. 2. DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE. 3. DO NOT REMOVE COVER. 4. PILOT LAMPS SOLDERED IN PLACE. 5. NO USER SERVICEABLE PARTS INSIDE. 6. REFER SERVICING TO QUALIFIED SERVICE PERSONEL. MAINTENANCE CLEANING THE TAPE HEADS Clean the heads frequently to remove dust and tape residue. Dirt on the heads will impair the sound quality of both recording and playback. There are two methods for head cleaning A. The simple method is to use a head-cleaning cassette, available at most audio stores. Follow the instructions supplied with the closing cassette. B. The heads can be also cleaned manually. 1 Depress the EJECT button of Tape A and Tape B in order to open the cassette. 2 Depress the PLAY button of Tape A and Tape B. 3 Wipe the heads with a soft not - free cloth or cotton swab that has been partially soaked in alcohol, until the heads are free of all dirt and residue deposits. SPECIFICATIONS GENERAL Power Supply : AC 230V ~ 50Hz AC 110/220V ~ 60/50Hz (Option) DC 12V = 8 x "D" (UM-1/R-20) size batteries (not included) Frequency Range: AM 530 - 1710 KHz FM 88 - 108 MHz SW 4 - 12 MHz (Option) Power Consumption: 19 Watts RMS Output: 2.2 Watts per channel CX400 Peak Output Power: 50W total (4 Ω at 1 kHz, THD 10%) Remarks: The manufacturer reserves the right to amend the specification without prior notice. Version: Rev. 2 (Toshiba IC)