Coby TF-DVD7700 User Manual - Page 41

Trouble shooting

Page 41 highlights

Trouble shooting Picture is disturbed when playing a DVD recorded by a VCR. This player incorporates copyright protection technology. Some discs include signals protected against copied by a VCR. Such recorded discs can not be .played properly. Player cannot be operated with the remote control unit Remote control unit is too far from the main unit or have too large angle with the Remote remote control usennits,sobr.attery is worn out. TV or other device operates erroneously The player,s remote control unit may cause some TVs with wireless remote control to operate erroneously. No sound is produced from speakers or sound is distorted For some discs, 96 kHz digital output of linear PCM audio signals is prohibited. Disc is dirty . MPaauinseunoirt,sslovwolupmlaey mode is is set to set. minimum. Earphone is plugged in. Volume is different for DVDs and CDs This is due to the different recording methods. No sound is produced or sound is distorted when connected to a TV , a amplifier, etc. Connection cables are not firmly plugged in or not contacted well. Connection plugs or jacks are dirty . Audio cables are not properly connected. Audio digital output is connected to a non-compatible AV amplifier,etc. Have wrong DTS setting. Bad playback quality The player is set to AV OUT but there are other AV signals inputted from AV jack. Player gets hot This is normal. Notes: The player may stop operation properly due to static electricity or other external influences. In this case, usually solve the problem by unplugging the power cord and then plugging it in again. If still can not solve it, consult with the nearest service center. Liquid crystal display A few picture elements may be black or a particular color displayed on the LCD screen. This is normal. -40-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Volume is different for DVDs and CDs
This is due to the different recording
methods.
No sound is produced or sound is
distorted when connected to a TV ,
a amplifier, etc.
Connection cables are not firmly
plugged in or not contacted well.
Connection plugs or jacks are dirty .
Audio cables are not properly
connected.
Audio digital output is connected to
a non-compatible AV amplifier,etc.
This is normal.
This player incorporates copyright
protection technology. Some discs include
signals protected against copied by a
VCR. Such recorded discs can not be
played properly.
.
Player cannot be operated with the
remote control unit
Remote control unit is too far from
the main unit or have too large angle
with the remote sensor.
Remote control unit s battery is worn
out.
For some discs, 96 kHz digital output
of linear PCM audio signals is
prohibited.
Disc is dirty .
Pause or slow play mode is set.
Main unit s volume is set to minimum.
Earphone is plugged in.
Picture is disturbed when playing a DVD
recorded by a VCR.
TV or other device operates erroneously
Player gets hot
Notes:
The player may stop operation properly
due to static electricity or other external
influences. In this case, usually solve
the problem by unplugging the power
cord and then plugging it in again. If still
can not solve it, consult with the nearest
service center.
Liquid crystal display
A few picture elements may be black or
a particular color displayed on the LCD
screen. This is normal.
-40-
,
No sound is produced from speakers
or sound is distorted
,
The player s remote control unit
may cause some TVs with wireless
remote control to operate erroneously.
,
Trouble shooting
Have wrong DTS setting.
The player is set to AV OUT but there
are other AV signals inputted from AV
jack.
Bad playback quality