Compaq 100S Compaq Armada 100S and Notebook 100 Series Maintenance and Service - Page 77
Releasing the Keyboard and, Disconnecting the Keyboard Cable
View all Compaq 100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3. Lift up the front edge of the keyboard and swing it back toward the display (Figure 5-19). 4. Release the ZIF (zero insertion force) connector to which the keyboard cable is attached . 5. Disconnect the keyboard cable from the system board . Figure 5-19. Releasing the Keyboard and Disconnecting the Keyboard Cable 6. Remove the keyboard. IMPORTANT: When installing the keyboard, align the three tabs on the back edge of the keyboard with the slots in the EMI shield. Removal and Replacement Procedures 5-21
Removal and Replacement Procedures
5-21
3. Lift up the front edge of the keyboard
and swing it back toward
the display (Figure 5-19).
4. Release the ZIF (zero insertion force) connector to which the
keyboard cable is attached
.
5. Disconnect the keyboard cable from the system board
.
Figure 5-19.
Releasing the Keyboard and
Disconnecting the Keyboard Cable
6. Remove the keyboard.
IMPORTANT:
When installing the keyboard, align the three tabs on the
back edge of the keyboard with the slots in the EMI shield.