Compaq 1200US Presario Select 1200 and 1600 Series Maintenance and Service Gui - Page 20

Preliminary Steps

Get Compaq 1200US - Presario - Celeron 800 MHz PDF manuals and user guides View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Maintenance & Service Guide Presario Series Models : 1270, 1670, and 1675 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Preliminary Steps Before running POST, complete the following preliminary steps: 1. If a power-on password has been established, type the password and press the Enter key. If the password is not known, clear the password. 2. Run Computer Checkup. 3. Turn off the computer and its external devices. 4. Disconnect any external devices that you do not want to test. Do not disconnect the printer if you want to test it or use it to log error messages. If the problem only occurs when an external device is connected to the computer, IMPORTANT: the problem may be related to the external device or its cable. Verify this by running POST with and without the external device connected. 5. Install loopback plugs in the serial and parallel connectors if you would like to test these ports. 6. Ensure the hard drive is installed in the computer. 7. Ensure that the battery pack is inserted in the computer and the computer is connected to an external AC power source. When the preliminary steps are completed, you are ready to run POST.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Maintenance & Service Guide
Presario Series
Models : 1270, 1670, and 1675
|
Home Page
|
Notice
|
Preface
|
Product Description
|
Troubleshooting
Illustrated Parts Catalog
|
Removal & Replacement Procedures
|
Specifications
Pin Assignments
|
Battery Pack Operations
Preliminary Steps
Before running
POST
, complete the following preliminary steps:
1. If a power-on password has been established, type the password and press the
Enter
key.
If
the password is not known,
clear the password.
2. Run
Computer Checkup
.
3. Turn off the computer and its external devices.
4. Disconnect any external devices that you do not want to test. Do not disconnect the printer if
you want to test it or use it to log error messages.
IMPORTANT:
If the problem only occurs when an external device is connected to the computer,
the problem may be related to the external device or its cable. Verify this by
running POST with and without the external device connected.
5. Install loopback plugs in the serial and parallel connectors if you would like to test these ports.
6. Ensure the hard drive is installed in the computer.
7. Ensure that the battery pack is inserted in the computer and the computer is connected to an
external AC power source.
When the preliminary steps are completed, you are ready to run
POST
.