Compaq 1200US Presario Select 1230 Series Maintenance and Service Guide - Page 49

Return to Removal &amp, Replacement Procedures

Get Compaq 1200US - Presario - Celeron 800 MHz PDF manuals and user guides View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations 4. Turn the computer over (right side up), pull forward on the display latches to release and open the display assembly. 5. Lift up front end of the palmrest cover with touch pad and remove it from the groove in the chassis. 6. Tilt the palmrest cover with touch pad, allowing it to rest on top of the keyboard, and disconnect the flex cable from the LIF connector on the palmrest cover. CAUTION: When replacing the palmrest cover with touch pad, ensure that the cable is fully inserted into the LIF connector on the system board. If the metal end should come in contact with the keyboard, damage may occur to the computer. NOTE: When replacing the palm rest cover ensure the cable is properly routed through the slot on the Upper CPU cover. To replace the palmrest cover with touch pad, reverse the previous procedures. Return to Removal & Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Maintenance & Service Guide
Presario 1200 Series
Models: 1230 and 1232
|
Home Page
|
Notice
|
Preface
|
Product Description
|
Troubleshooting
Illustrated Parts Catalog
|
Removal & Replacement Procedures
|
Specifications
Pin Assignments
|
Battery Pack Operations
4. Turn the computer
over (right side up), pull
forward on the display
latches to release and
open the display
assembly.
5. Lift up front end of
the palmrest cover with
touch pad and remove it
from the groove in the
chassis.
6. Tilt the palmrest
cover with touch pad,
allowing it to rest on top
of the keyboard, and
disconnect the flex cable
from the LIF connector
on the palmrest cover.
CAUTION:
When
replacing the
palmrest cover
with touch pad,
ensure that the
cable is fully
inserted into the
LIF connector on
the system board.
If the metal end
should come in
contact with the
keyboard, damage
may occur to the
computer.
NOTE:
When replacing
the palm rest
cover ensure
the cable is
properly routed
through the
slot on the
Upper CPU
cover.
To replace the palmrest
cover with touch pad,
reverse the previous
procedures.
Return to Removal &
Replacement Procedures