Compaq 1215US Presario 1245 Series Maintenance and Service Guide - Page 91
Clearing the Power-on Password, Remove
UPC - 720591750626
View all Compaq 1215US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Maintenance & Service Guide Presario 1200 Series Model: 1245 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Clearing the Power-on Password Clearing the power-on password requires removing all Setup attributes that are programmed in the CMOS. The RTC battery is located on the system board. If the password is not known, clear it by performing the following steps: 1. Turn off the computer. 2. Disconnect the power cord. 3. Remove the battery pack. 4. Remove the Palmrest Cover with Touch Pad. 5. Move the keyboard to allow access to the heatspreader. 6. Remove the heatspreader. 7. Remove the modem. 8. Remove the RTC battery for 30 seconds and replace it. 9. Reassemble the computer by reversing the previous steps. 10. Turn on the computer to verify that the poweron password has been cleared. If it has not been cleared, repeat Steps 1 through 10. Return to preliminary steps page. or Return to Troubleshooting index page.