Compaq 1215US Presario Select 1200 Series Maintenance and Service Guide - Page 50
Removing the Processor, continued
UPC - 720591750626
View all Compaq 1215US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Maintenance & Service Guide Presario Series Models: 1246, 1247, 1277, 1278, and 1279 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removal and Replacement Procedures Removing the Processor, continued To replace the processor, complete the following steps: The notch on the upper left corner of the processor serves as an orientation IMPORTANT: indicator. Align the notch on the left corner of the processor with the notch on the left corner of the processor chassis slot. 1. Insert the processor into the slot on the system board. When installing the processor into the chassis slot, be sure that NOTE: the hole pattern on the chassis slot lines up with the pins on the processor. The processor should drop into the socket without any force. 2. Insert a small blade screwdriver into the top slot opening on the processor and push away from the display to lock the processor. Return to Removal & Replacement Procedures