Compaq 1215US Presario Select 1230 Series Maintenance and Service Guide - Page 49
Return to Removal &, Replacement Procedures
UPC - 720591750626
View all Compaq 1215US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Maintenance & Service Guide Presario 1200 Series Models: 1230 and 1232 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations 4. Turn the computer over (right side up), pull forward on the display latches to release and open the display assembly. 5. Lift up front end of the palmrest cover with touch pad and remove it from the groove in the chassis. 6. Tilt the palmrest cover with touch pad, allowing it to rest on top of the keyboard, and disconnect the flex cable from the LIF connector on the palmrest cover. CAUTION: When replacing the palmrest cover with touch pad, ensure that the cable is fully inserted into the LIF connector on the system board. If the metal end should come in contact with the keyboard, damage may occur to the computer. NOTE: When replacing the palm rest cover ensure the cable is properly routed through the slot on the Upper CPU cover. To replace the palmrest cover with touch pad, reverse the previous procedures. Return to Removal & Replacement Procedures