Compaq 1275 Presario Select 1200 Series Maintenance and Service Guide - Page 51
Index
UPC - 743172831262
View all Compaq 1275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Presario 1200 Series Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275 Before You Begin Specifications Parts Catalog Removal Sequence Troubleshooting Battery Operations Product Description Pin Assignments Index 4. Turn the computer over (right side up), pull forward on the display latches to release and open the display assembly. 5. Lift up front end of the palmrest cover with touch pad and remove it from the groove in the chassis. 6. Tilt the palmrest cover with touch pad, allowing it to rest on top of the keyboard, and disconnect the flex cable from the ZIF connector on the palmrest cover. CAUTION: When replacing the palmrest cover with touch pad, ensure that the cable is fully inserted into the ZIF connector on the system board. If the metal end comes in contact with the keyboard, damage may occur to the computer. To replace the palmrest cover with touch pad, reverse the previous procedures. When replacing the palmrest cover, ensure that the cable is NOTE: properly routed through the slot on the Upper CPU cover. Return to Removal & Replacement Procedures