Compaq 15-a000 15 Notebook PC 15 TouchSmart Notebook PC 15 Notebook PC 15 Touc - Page 75
Lift the rear edge of the top cover, until the left and right sides disengage from the base enclosure.
View all Compaq 15-a000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
2. Disconnect the following cables: (1): Power button board cable (2): Keyboard cable (3): Touchpad cable 3. Remove the 14 Phillips PM2.5×6.0 screws that secure the top cover to the computer. 4. Position the computer upright with the front toward you, and then open the computer. 5. Lift the rear edge of the top cover (1) until the left and right sides disengage from the base enclosure. Component replacement procedures 67
2.
Disconnect the following cables:
(1)
: Power button board cable
(2)
: Keyboard cable
(3)
: Touchpad cable
3.
Remove the 14 Phillips PM2.5×6.0 screws that secure the top cover to the computer.
4.
Position the computer upright with the front toward you, and then open the computer.
5.
Lift the rear edge of the top cover
(1)
until the left and right sides disengage from the base enclosure.
Component replacement procedures
67