Compaq 155727-003 Presario 1200 Series Models XL101-XL113, XL115, XL118-XL127 - Page 110
Important, through the slot on the upper CPU cover and lift the display panel off of the unit.
View all Compaq 155727-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Presario 1200 Series Models: XL101-XL113, XL115, XL118-XL127 9. If the display data cable has the LVDS connector on the end as shown below, remove the connector by 1 grasping the edges of the connector and 2 gently pulling out the cable. ÄCAUTION: For TFT displays, the connector on the end of the flex cable must be removed before the cable can be routed through the slot on the upper CPU cover. 10. Gently pull the flex data cable and backlight cable attached to the display panel through the slot on the upper CPU cover and lift the display panel off of the unit. Important: When removing the display panel assembly, take note of the correct routing position for the display flex cable for use during replacement. Note: For TFT displays, Compaq recommends replacing the LVDS connector on the end of the display flex cable after the display panel assembly has been removed from the unit. To replace the display panel, reverse these procedures. 30 REMOVAL SEQUENCE PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES