Compaq 6000 Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models
Compaq 6000 - ProLiant - 128 MB RAM Manual
 |
UPC - 894582579463
View all Compaq 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 6000 manual content summary:
- Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 1
Computer Setup (F10) Utility Guide HP Compaq 6000 Pro Business PCs - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 2
countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services -Packard Company. Computer Setup (F10) Utility Guide HP Compaq 6000 Pro Business PCs First Edition (September 2009) Document Part Number: 576437-001 - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 3
About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes. WARNING! Text set off in this manner indicates that failure to follow directions could - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 4
iv About This Book ENWW - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 5
Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ...1 Using Computer Setup (F10) Utilities 2 Computer Setup-File ...3 Computer Setup-Storage 4 Computer Setup-Security 6 Computer Setup-Power ...9 Computer Setup-Advanced 10 Recovering the Configuration Settings 12 - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 6
vi ENWW - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 7
to change the display status of Power-On Self-Test (POST) messages. Post Messages Disabled suppresses most POST messages, such as memory count, product name, and other non-error text messages. If a POST error occurs, the error is displayed regardless of the mode selected. To manually switch to Post - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 8
one or more computers. ● Execute self-tests on a specified ATA hard drive (when supported by drive). ● Enable or disable DriveLock security (when supported by drive). Using Computer Setup (F10) Utilities Computer Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 9
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 2 Computer Setup-File Option Description System Information Lists: ● Product name ● SKU number (some models) ● Processor type/speed/stepping ● Cache size (L1/L2) ● Installed memory size - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 10
: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3 Computer Setup-Storage Option Description Device Configuration Lists all installed BIOS-controlled storage devices. When a device is selected, detailed information and options are displayed - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 11
information on AHCI, go to http://www.hp.com/support. Select your country and language, select See support and troubleshooting information, enter the model number of the computer, and press Enter. In the Resources category, click Manuals (guides, supplements, addendums, etc). Under Quick jump to - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 12
jumper to disable the power-on password. Device Security USB Security Slot Security See the Desktop Management Guide for more information. Allows you to set Device Available/Device Hidden for: ● Serial ports ● Parallel port ● System audio ● Network controllers (some models) ● Embedded security - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 13
only; the network controller must be either a PCI expansion card or embedded on the system board.) System IDs Allows you to set: ● Asset tag (18-byte identifier), a property identification number assigned by the company to the computer. ● Ownership tag (80-byte identifier) displayed during POST - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 14
user to limit operating system control of the Embedded Security Device. Changing this setting requires turning the computer off and then back on. accessed with invalid passwords. The choice, None, is replaced by Power-On Password if a Power-On Password is enabled. NOTE: Setup Browse Mode must be set - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 15
is disabled, S4 and S5 both have the LED off. S1 (no longer supported) and S3 use 1 blink per second. SATA power management enables or disables SATA bus and/or device power management. Fan idle mode-This bar graph controls the minimum permitted fan speed. NOTE: This setting only changes the minimum - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 16
Setup-Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 6 Computer Setup-Advanced (for advanced users) Option Description Power-On Options Allows you to set: ● POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 17
. Execute Memory Test Restarts the computer and executes the POST memory test. (some models) BIOS Power-On Allows you to set the computer to turn on automatically at a time you specify. Onboard Devices PCI Devices Allows you to set resources for or disable onboard system devices (serial port or - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 18
be used to disable multi-processor support under the OS. ● Internal speaker (some models) (does not affect external speakers). ● NIC PXE Option ROM Download (enable/disable). The BIOS contains an embedded NIC option ROM to allow the unit to boot through the network to a PXE server. This is typically - Compaq 6000 | Computer Setup (F10) Utility Guide - HP Compaq 6000 Pro Models - Page 19
NOTE: It is recommended that you save any modified computer configuration settings to a a USB flash media device or a diskette-like device configuration and perform the Restore from Removable Media command with the Computer Setup (F10) Utility. (See Restore from Removable Media on page 3 in the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
 |
 |
Computer Setup (F10) Utility Guide
HP Compaq 6000 Pro Business PCs