Compaq D300v Compaq Evo D300v User`s Guide - Page 15

Installing Additional Memory, preinstalled DIMM with a higher capacity DIMM. - memory upgrade

Get Compaq D300v - Evo - 128 MB RAM PDF manuals and user guides
UPC - 613326412183
View all Compaq D300v manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Hardware Upgrades 2. Remove the computer access panels. 3. Squeeze the two circular tabs inside the front of the chassis 1, then pull the front bezel away from the chassis to release it 2. Removing the Front Bezel When replacing the front bezel, ensure that the side tabs are properly placed in the chassis before replacing the front bezel back. Installing Additional Memory The memory sockets on the system board can be populated with industry-standard DIMMs. These memory module slots are populated with at least one preinstalled memory module. To achieve the maximum memory support, you may be required to replace the preinstalled DIMM with a higher capacity DIMM. The DRAM controller supports a 64-bit memory data interface, optionally supporting 64-bit wide and 128-bit wide non-ECC DIMM modules. The supported DRAM type is Synchronous DRAM (SDRAM). 2-4 Compaq Evo D300 User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
Hardware Upgrades
2.
Remove the computer access panels.
3.
Squeeze the two circular tabs inside the front of the chassis
1
,
then pull the front bezel away from the chassis to release it
2
.
Removing the Front Bezel
When replacing the front bezel, ensure that the side tabs are properly
placed in the chassis before replacing the front bezel back.
Installing Additional Memory
The memory sockets on the system board can be populated with
industry-standard DIMMs. These memory module slots are
populated with at least one preinstalled memory module. To achieve
the maximum memory support, you may be required to replace the
preinstalled DIMM with a higher capacity DIMM.
The DRAM controller supports a 64-bit memory data interface,
optionally supporting 64-bit wide and 128-bit wide non-ECC DIMM
modules. The supported DRAM type is Synchronous DRAM
(SDRAM).
2-4
Compaq Evo D300 User’s Guide