Compaq D300v Computer Set Up Guide Evo Desktop Family, Evo Workstation Family,
Compaq D300v - Evo - 128 MB RAM Manual
UPC - 613326412183
View all Compaq D300v manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq D300v manual content summary:
- Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 1
b Computer Setup Guide Evo Desktop Family Evo Workstation Family Deskpro Workstations Document Part Number: 215867-003 September 2001 This guide provides instructions on how to use Computer Setup utilities, a software tool installed on the hard drive. This tool is used to reconfigure and modify - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 2
. Evo is a trademark of Compaq Information Technologies Group, L.P. in the United States and other countries. Microsoft, MS-DOS, and Windows, other countries. All other product names mentioned herein may be trademarks of their respective companies. Compaq service tool software, including associated - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 3
Contents Computer Setup Computer Setup Utilities (F10 1 Using Computer Setup Utilities 3 Computer Setup Guide iii - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 4
including settings for processor, graphics, memory, audio, storage, communications, and input I Configure Quiet Drive options (for drives that support this feature). I Enable Quick Boot, which is Network Server Mode, which allows the computer to boot the operating system when the power-on password - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 5
I Establish an Ownership Tag, the text of which is displayed each time the system is turned on or restarted. I Enter the Asset Tag or property identification number assigned by your company to this computer. I Enable the power-on password prompt during system restarts (warm boots) as well as during - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 6
menu, complete the following steps: 1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart five headings appears in the Computer Setup Utilities menu: File, Storage, Security, Power, and Advanced. 5. Use the Tab key to select the appropriate heading. Use Guide 3 - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 7
any established passwords. Ignore Changes and Exit Exits Computer Setup without applying or saving any changes. Save Changes and Exit Saves changes to system configuration and exits Computer Setup. Support for Computer Setup options may vary depending on your specific hardware configuration - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 8
as diskette drive) Disk (treated as hard drive) ATAPI Zip drive None (treated as Other) Diskette (treated as diskette drive) Disk (treated as hard drive) Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup Guide 5 - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 9
) Transfer Mode (IDE devices only) Specifies the active data transfer mode. Options (subject to device capabilities) are PIO 0, Max PIO, Enhanced DMA, Ultra DMA 0, and Max UDMA. Support for Computer Setup options may vary depending on your specific hardware configuration. 6 Computer Setup Guide - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 10
number of heads may not exceed 256. The number of sectors per track may not exceed 63. These fields are only visible and changeable when the drive translation mode is set to User. Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup Guide - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 11
to Quiet, the drive will not operate at maximum performance. ✎ If the drive does not support Quiet mode, the Quiet Drive option will not Turn the computer off, then on, manually. Support for Computer Setup options may vary depending on your specific hardware configuration. 8 Computer Setup Guide - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 12
self-tests is attached to the system. Controller Order (This feature is supported on select models only.) Allows you to specify the order of attached embedded IDE controllers. Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup Guide 9 - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 13
devices (such as a diskette drive, hard drive, CD-ROM, or network interface card) are checked for a bootable operating system image. Each device on and press the Enter key. Support for Computer Setup options may vary depending on your specific hardware configuration. 10 Computer Setup Guide - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 14
order to use some Compaq remote security tools. See the Troubleshooting Guide for more information. Power-On Password Allows you to set and enable power-on password. See the Troubleshooting Guide for more information. Password Options (This selection will appear only if a power-on password is set - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 15
-boot sequence. ✎ This selection will only appear when at least one drive that supports the DriveLock feature is attached to the system. Support for Computer Setup options may vary depending on your specific hardware configuration. *Option not supported on all products. 12 Computer Setup Guide - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 16
enabled and disk accesses are being serviced by the operating system, any MBR change will be detected by the BIOS during the next reboot, and an MBR Security warning message will be displayed. Support for Computer Setup options may vary depending on your specific hardware configuration. *Option not - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 17
/disables Serial ports A and B, parallel ports, USB ports, system audio security, network controllers (some models), and SCSI controllers. Support for Computer Setup options may vary depending on your specific hardware configuration. *Option not supported on all products. 14 Computer Setup Guide - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 18
is invalid (These ID numbers are normally set in the factory and are used to uniquely identify the system.) • Keyboard locale setting (for example, English or German) for System ID entry Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 19
systems • Power LED blink in suspend mode (enable/disable). ✎ Energy Saver Options will appear only if the energy saver mode is enabled. This option does not apply under ACPI-enabled operating systems. Support for Computer Setup options may vary depending on your specific hardware configuration - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 20
text "F12 = Network Service Boot" during POST. Disabling this feature prevents the text from being displayed. However, pressing the F12 key will still force the system to attempt booting from the network. Support for Computer Setup options may vary depending on your specific hardware configuration - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 21
supported on select models only.) • Remote wakeup boot source (remote server/local hard drive) • UUID (Universal Unique Identifier) (enable/disable) Every Compaq computer has a unique identifier (serial number, date/time of manufacture, etc). Enabling this feature allows software (drivers, network - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 22
memory manager, HIMEM.SYS, does not work properly when USB buffers are at top of memory AND the system has 64MB or less of RAM. Support for Computer Setup options may vary depending on your specific hardware configuration. * These options should be used by advanced users only. Computer Setup Guide - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 23
VGA palette snooping bit in PCI configuration space; only needed when more than one graphics controller is installed • PCI SERR# Generation • ECC support allows hardware based error correction for ECC-capable memories Support for Computer Setup options may vary depending on your specific hardware - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 24
the network, internet, etc) to read the processor's unique number. • ACPI S3 support (enable/disable). S3 is an ACPI (advanced configuration and power interface) sleep state that some add-in hardware options may not support. This feature is supported on select models only. • ACPI S3 Video REPOST - Compaq D300v | Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 25
video adapters in the system. Allows users to specify which VGA controller will be the "boot" or primary VGA controller. Support for Computer Setup options may vary depending on your specific hardware configuration. * These options should be used by advanced users only. 22 Computer Setup Guide
b
Computer Setup Guide
Evo Desktop Family
Evo Workstation Family
Deskpro Workstations
Document Part Number: 215867-003
September 2001
This guide provides instructions on how to use Computer Setup
utilities, a software tool installed on the hard drive. This tool is used
to reconfigure and modify computer default settings when new
hardware is installed and for maintenance purposes.