Compaq Evo Notebook n200 Hardware Guide Evo Notebook N200 Series - Page 57
Connecting the Modem Cable
View all Compaq Evo Notebook n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
External Device Connections Connecting the Modem Cable The modem cable, which has a standard 6-pin RJ-11 connector at each end, must be connected to an analog telephone line. Jacks for digital PBX systems may resemble analog telephone jacks, but are not compatible with the modem. Immediately disconnect an accidental connection to a digital line. 1. If the modem cable contains noise suppression circuitry 1, which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the computer. 2. Plug the modem cable into the RJ-11 jack 2 on the computer. Å WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug a telephone cable into the RJ-45 jack. 3. If you are connecting the cable to a telephone jack that is not an RJ-11 jack, plug a country-specific modem adapter into the telephone jack 3. 4. Plug the modem cable into the country-specific modem adapter or into an RJ-11 telephone jack 4. Connecting a modem cable 7-2 Hardware Guide