Compaq Evo n1000v Maintenance and Service Guide - Page 155
Removing the Speaker Assembly
View all Compaq Evo n1000v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Removal and Replacement Procedures 3. Remove the charger board (Section 5.18). 4. Disconnect the speaker cable 1 from the system board (Figure 5-38). 5. Swing the battery bay support bracket 2 to the right until it clears the right edge of the speaker assembly. 6. Lift the front edge of the speaker assembly until it rests at an angle 3. 7. Slide the speaker assembly forward and remove it 4 from the base enclosure. Figure 5-38. Removing the Speaker Assembly Reverse the preceding procedures to install the speaker assembly. Maintenance and Service Guide 5-49
Removal and Replacement Procedures
Maintenance and Service Guide
5–49
3. Remove the charger board (Section 5.18).
4. Disconnect the speaker cable
1
from the system board
(Figure 5-38).
5. Swing the battery bay support bracket
2
to the right until it
clears the right edge of the speaker assembly.
6. Lift the front edge of the speaker assembly until it rests at an
angle
3
.
7.
Slide the speaker assembly forward and remove it
4
from the
base enclosure.
Figure 5-38. Removing the Speaker Assembly
Reverse the preceding procedures to install the speaker assembly.