Compaq Evo n150 Evo Notebook N150 Series Maintenance and Service Guide - Page 96
Removing the System Board Screws, black M2.5 × 4.0 screw
View all Compaq Evo n150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Removal and Replacement Procedures 4. Position the base enclosure so the front faces you. 5. Remove the following screws, as illustrated in Figure 5-20: two black M2 × 14.5 screws that secure the PC Card assembly to the base enclosure black M2.5 × 4.5 screw near the USB connector that secures the system board to the base enclosure black M2.5 × 4.0 screw that secures the modem connector/cable to the base enclosure black M2 × 4.0 screw near the display connector that secures the system board to the base enclosure Figure 5-20. Removing the System Board Screws 5-30 Maintenance and Service Guide
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
4.
Position the base enclosure so the front faces you.
5.
Remove the following screws, as illustrated in Figure 5-20:
two black M2 × 14.5 screws
that secure the PC Card
assembly to the base enclosure
black M2.5 × 4.5 screw
near the USB connector that
secures the system board to the base enclosure
black M2.5 × 4.0 screw
that secures the modem
connector/cable to the base enclosure
black M2 × 4.0 screw
near the display connector that
secures the system board to the base enclosure
Figure 5-20. Removing the System Board Screws