Compaq Evo n160 Maintenance and Service Guide Compaq Evo N160 Series - Page 92
Removing the Top Cover Screws, that secures the top
View all Compaq Evo n160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Removal and Replacement Procedures 3. Remove the eight black M2 × 9 screws 1 that secure the top cover to the base enclosure (Figure 5-18). 4. Open the parallel and serial connector cover 2. 5. Remove the silver M2 × 6.5 screw 3 that secures the top cover to the base enclosure through the rear panel. Figure 5-18. Removing the Top Cover Screws 6. Turn the computer top side up with the front facing you. Maintenance and Service Guide 5-25
Removal and Replacement Procedures
Maintenance and Service Guide
5
–
25
3.
Remove the eight black M2
×
9 screws
1
that secure the top
cover to the base enclosure (Figure 5-18).
4.
Open the parallel and serial connector cover
2
.
5.
Remove the silver M2
×
6.5 screw
3
that secures the top
cover to the base enclosure through the rear panel.
Figure 5-18. Removing the Top Cover Screws
6.
Turn the computer top side up with the front facing you.