Compaq Evo n400c Compaq Evo Notebook N410c Series and N410c Series Maintenance - Page 108
Removing the Keyboard Screws, Prepare the notebook for disassembly
View all Compaq Evo n400c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Removal and Replacement Procedures Evo Notebook N400c models only-If you are removing a pointing stick keyboard, you must first remove the palm rest so the pointing stick button cable can be disconnected. Refer to Section 5.5 for palm rest removal instructions. If you are removing a TouchPad keyboard, it is not necessary to remove the palm rest prior to removing the keyboard. 1. Prepare the notebook for disassembly (Section 5.3). 2. Turn the notebook bottom side up with the front facing forward. 3. Remove the four TM2.0 × 6.0 screws that secure the keyboard to the base enclosure (Figure 5-17). Figure 5-17. Removing the Keyboard Screws Maintenance and Service Guide 5-23
Removal and Replacement Procedures
Maintenance and Service Guide
5–23
Evo Notebook N400c models only
—If you are removing a
pointing stick keyboard, you must first remove the palm rest so
the pointing stick button cable can be disconnected. Refer to
Section 5.5 for palm rest removal instructions.
If you are removing a TouchPad keyboard, it is not necessary to
remove the palm rest prior to removing the keyboard.
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook bottom side up with the front facing
forward.
3. Remove the four TM2.0 × 6.0 screws that secure the
keyboard to the base enclosure (Figure 5-17).
Figure 5-17. Removing the Keyboard Screws