Compaq Evo n600c Compaq Evo Notebook N600c, N610c, N610v and N620c Notebook PC - Page 131
Disconnecting the Pointing Device and, Keyboard Cables
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Removal and Replacement Procedures 7. Lift the top edge of the keyboard and swing it up and forward until it rests on the top cover 1 (Figure 5-12). 8. Disengage the keyboard cable from the retaining clips in the top cover. 9. Release the ZIF connector to which the pointing device cable is attached 2 and disconnect the pointing device cable 3. 10. Release the ZIF connector to which the keyboard cable is attached 4 and disconnect the keyboard cable 5. Figure 5-12. Disconnecting the Pointing Device and Keyboard Cables 11. Remove the keyboard. Reverse the preceding procedure to replace the keyboard. Maintenance and Service Guide 5-21
Removal and Replacement Procedures
Maintenance and Service Guide
5–21
7.
Lift the top edge of the keyboard and swing it up and forward
until it rests on the top cover
1
(Figure 5-12).
8. Disengage the keyboard cable from the retaining clips in the
top cover.
9.
Release the ZIF connector to which the pointing device cable
is attached
2
and disconnect the pointing device cable
3
.
10. Release the ZIF connector to which the keyboard cable is
attached
4
and disconnect the keyboard cable
5
.
Figure 5-12. Disconnecting the Pointing Device and
Keyboard Cables
11. Remove the keyboard.
Reverse the preceding procedure to replace the keyboard.