Compaq Presario CQ50-200 HP G50 Notebook PC and Compaq Presario CQ50 Notebook - Page 73
until the top cover disengages from the base enclosure
View all Compaq Presario CQ50-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
5. Release the ZIF connector to which the TouchPad cable is attached, and disconnect the TouchPad cable (1) from the system board. 6. Remove the four Phillips PM2.0×6.0 screws (2) that secure the top cover to the base enclosure. 7. Lift the rear edge of the top cover (1) until the top cover disengages from the base enclosure. 8. Remove the top cover (2). Reverse this procedure to install the top cover. Component replacement procedures 65
5.
Release the ZIF connector to which the TouchPad cable is attached, and disconnect the TouchPad
cable
(1)
from the system board.
6.
Remove the four Phillips PM2.0×6.0 screws
(2)
that secure the top cover to the base enclosure.
7.
Lift the rear edge of the top cover
(1)
until the top cover disengages from the base enclosure.
8.
Remove the top cover
(2)
.
Reverse this procedure to install the top cover.
Component replacement procedures
65