Compaq ProLiant 6000 Compaq DLT Tape Array II: High-Performance Backup of Ente - Page 18
GB/hr, Data Compression
View all Compaq ProLiant 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ECG075.0997 (cont.) DLT Tape Array II ... 180 160 140 120 100 GB/hr 80 60 40 20 0 1 Job 2 Jobs 4 Jobs Data Compression 2:1 4:1 8 Jobs Figure 11: Concurrent backup performance running Cheyenne ARCserve 6.0 (image option) under Windows NT. Jobs SCSI Cards 1 4 2 1 2 2 2 2 2 4 2 4 4 2 4 4 4 4 8 4 DLTs 8 2 2 4 4 8 4 4 8 8 RAIT Smart Cards Drives Level per Job per Job 0 4 56 No RAIT 2 28 No RAIT 2 28 0 2 28 0 2 28 0 2 28 No RAIT 1 14 No RAIT 1 14 0 1 14 No RAIT 1 channel 7 2:1 Backup 4:1 Backup (GB/Hr) (GB/Hr) 83.56 54.02 60.05 97.03 118.36 135.64 107.71 121.88 154.27 165.26 82.48 57.71 68.79 107.11 136.52 137.15 112.73 135.04 147.14 164.18 Table 6: Test data for concurrent backup tests under Windows NT. • Jobs: Number of Cheyenne backup jobs started concurrently under Windows NT. • SCSI Cards: Number of Wide-Ultra SCSI-3 cards used to connect to the 35/70 GB DLT drives. • DLT: Number of tape drives used. • RAIT Level: When a job used more than one drive, the drives were configured as RAIT 0. • SMART Cards - Number of SMART-2/P Array Controllers used per job (to help determine loading factors). • Drives per Job: Number of hard disk drives per job (to give perspective on feed source to each tape job running). • Note: In all testing, care was taken to balance the loading of the two PCI buses.