Compaq ProLiant 800 HP ProLiant BL e-Class Integrated Administrator User Guide - Page 89
Enclosure Network Configuration Commands, Table 4-4
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Command Line Interface Enclosure Network Configuration Commands Table 4-4: Enclosure Network Configuration Commands Command ADD SNMP TRAPRECEIVE R DISABLE SECURESH DISABLE SNMP DISABLE TELNET DISABLE WEB Description Adds an IP address to receive SNMP traps. Only v1 traps are supported. Traps are directed to the SNMP default port, 162. Disables Secure Shell access to the Integrated Administrator. Disabling Secure Shell prevents access to the Web-based user interface and the Secure Shell terminal interface until a terminal session reenables the Secure Shell protocol. Disables SNMP support for the Integrated Administrator. Does not clear the SNMP trap receivers that have been configured. SNMP trap receivers can still be added and removed. If SNMP is disabled, Insight Manager agents do not work properly. Disables Telnet access to the Integrated Administrator. Disables HTTP and HTTPS access to the Integrated Administrator. This command prevents access to the Web-based user interface. Restrictions Only enclosure administrators may execute this command. A maximum of 8 IP address may be added to receive SNMP traps. The must be in the form where ### ranges from 0 to 255. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. Only enclosure administrators may execute this command. continued 4-12 HP ProLiant BL e-Class Integrated Administrator User Guide