Compaq d530 HP Compaq Business Desktops d530 Convertible Minitower - (English) - Page 40
Installing a Hard Drive into a 3.5-inch Drive Bay
View all Compaq d530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Hardware Upgrades Installing a Hard Drive into a 3.5-inch Drive Bay ✎ Both parallel advanced technology attachment (PATA) and serial advanced technology attachment (SATA) hard drives can be installed on this computer. If you are installing a SATA drive in your computer for the first time, refer to the white paper "Implementation of Serial ATA on HP Business Desktops" for more information. The white paper is located at www.hp.com/support. ✎ Make sure to back up the data on the old hard drive before removing it so that you can install the data onto the new hard drive. To install a hard drive in a 3.5-inch drive bay: 1. If you have locked the Smart Cover Lock, see the "Smart Cover Lock" section or use Computer Setup to unlock it. 2. Turn off the computer properly through the operating system and turn off any external devices. Disconnect the power cord from the power outlet and remove the computer access panel. 3. Install four 6-32 standard guide screws, two on each side of the drive. 2-22 Installing the Hard Drive Guide Screws ✎ The hard drive uses 6-32 standard guide screws. Four extra guide screws are installed on the hard drive bracket under the access panel. The HP-supplied standard screws are silver. www.hp.com Hardware Reference Guide