Compaq d538 Desktop Management Guide - Page 12
HPQFlash, FailSafe Boot Block ROM, If there is a diskette in the diskette drive
View all Compaq d538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Desktop Management Guide HPQFlash The HPQFlash utility is used to locally update or restore the System ROM on individual PCs through a Windows operating system. For more information on HPQFlash, visit http://h18000.www1.hp.com/support/files/hpcpqdt/us/download/ 18607.html. FailSafe Boot Block ROM The FailSafe Boot Block ROM allows for system recovery in the unlikely event of a ROM flash failure, for example, if a power failure were to occur during a ROM upgrade. The Boot Block is a flash-protected section of the ROM that checks for a valid system ROM flash when power to the system is turned on. ■ If the system ROM is valid, the system starts normally. ■ If the system ROM fails the validation check, the FailSafe Boot Block ROM provides enough support to start the system from a ROMPaq diskette, which will program the system ROM with a valid image. When the bootblock detects an invalid system ROM, the System Power LED blinks RED 8 times, one every second, followed by a 2-second pause. Also 8 simultaneous beeps will be heard. A Boot Block recovery mode message is displayed on the screen (some models). To recover the system after it enters Boot Block recovery mode, complete the following steps: 1. If there is a diskette in the diskette drive, remove the diskette and turn off the power. 2. Insert a ROMPaq diskette into the diskette drive. 3. Turn on power to the system. 4. If no ROMPaq diskette is found, you will be prompted to insert one and restart the computer. 5. If a setup password has been established, the Caps Lock light will turn on and you will be prompted to enter the password. 6. Enter the setup password. 8 www.hp.com Desktop Management Guide