Compaq dc7800 Service Reference Guide - HP Compaq dc7800 Business PC - Page 135
Computer Setup F10 Utility Guide, Connect external cables to the installed card
View all Compaq dc7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. 8. To install a new expansion card, slide the card under the slot cover retention latch and press the card down into the socket on the system board. NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. 9. Rotate the slot cover retention latch back in place to secure the expansion card. 10. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 11. Replace the access panel. 12. If necessary, reconfigure the computer. Refer to the Computer Setup (F10) Utility Guide for instructions on using Computer Setup. Expansion Cards 123