Compaq dc7900 Hardware Reference Guide - dc7900 Series Convertible Minitower - Page 53
CAUTION, Removing Bezel Blanks,
View all Compaq dc7900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
11. Reconnect all power and data cables to the drives in the 5.25-inch drive bays. 12. Remove the bezel subpanel as described in the Removing Bezel Blanks on page 15 section. CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. 13. Reposition the bezel blanks within the subpanel in the proper orientation for the minitower configuration. 14. Reposition the subpanel (rotate it 90º) with the logo at the bottom, then snap it back into the bezel. Figure 2-44 Changing from a Desktop to a Minitower Configuration 15. Replace the front bezel and computer access panel. 16. Reconnect the power cord and turn on the computer. 17. Lock any security devices that were disengaged when the computer access panel was removed. ENWW Changing from a Desktop to a MinitowerConfiguration 47