Craftsman 11579 Operation Manual - Page 9

UNPACKING This product has been shipped completely assembled. [] Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. [] Inspect the tool carefully to make sure no breakage or damage occurred during shipping. [] Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. [] If any parts are damaged or missing, please call 1-800-932-3188 for assistance. PACKING LiST Reciprocating Saw Blades (2) Hex Key Operator's Manual _, WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. A WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. A WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. A WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. A WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. A WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. APPLiCATiONS You may use this tool for the following purposes: [] Cutting all types of wood products (lumber, plywood, paneling, composition board, and hard wood) [] Cutting masonite and plastic [] Cutting drywall [] Cutting metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper This product will accept DieHard_ 19.2 V lithium-ion battery packs and Craftsman 19.2 V nickel-cadmium battery packs. For complete charging instructions, refer to the Operator's Manual for the battery packs and chargers listed in the General Safety Rules. BATTERY PROTECTION FEATURES DieHard® 19.2 V lithium-ion battery packs are designed with features that protect the lithium-ion cells and maximize battery life. If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged.