Cub Cadet RZT L 54-KH RZT L 54 KH Operator's Manual

Cub Cadet RZT L 54-KH Manual

Get Cub Cadet RZT L 54-KH PDF manuals and user guides View all Cub Cadet RZT L 54-KH manuals
Add to My Manuals
Save this manual to your list of manuals

Cub Cadet RZT L 54-KH manual content summary:

  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 1
    • Service • Troubleshooting • Warranty Operator's Manual RZT L Series Tractor WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Printed In USA CUB CADET LLC
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 2
    To The Owner 1 Thank You Thank you for purchasing a Cub Cadet Zero-Turn Tractor. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up,
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 3
    to operate this machine without proper slacks and shirts. Loose fitting clothes and jewelry can be instruction. caught in movable parts. Never operate this machine in 5. To help avoid blade contact or a thrown object injury, bare feet or sandals. keep bystanders, helpers, children and pets at
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 4
    included as part of this manual to measure blade(s), set parking brake, stop engine and wait caution when changing direction on slopes. until the blade instructions provided with the approved accessory or attachment. Do not mow near drop-offs, ditches or embankments. The mower could suddenly turn
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 5
    (s) only, listed in this manual. "Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!" 6. Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. 7. Keep all nuts, bolts, and screws
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 6
    or replace safety and instruction labels, as necessary. may include the following emission control systems: Engine Modification (EM) and Three Way Catalyst (TWC) if so equipped. 14. Observe proper disposal laws and regulations for gas, oil, When required, models are equipped with low permeation
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 7
    to assemble and operate. Symbol Description READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING- ROTATING BLADES Do not put hands or feet near rotating parts or under the cutting deck. Contact with the
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 8
    8 Slope Gauge Section 2 - Safe Operation Practices (OK) Figure 1 15° Slope (TOO STEEP) Figure 2 15° Slope 15° dashed line USE THIS SLOPE GAUGE TO DETERMINE IF A SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold along the dashed line.
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 9
    RZT L Tractor • One Tractor Operator's Manual • One Oil Drain Tube • One Engine Operator's Manual • One Deck Wash Hose Coupler • One Hardware Pack NOTE: This Operator's Manual covers several models. Tractor features may vary by model wire harness while installing the seat. See Figure 3-3. Figure
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 10
    CALIFORNIA PROPOSITION 65 WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the put into service after the date shown on top/side of battery, charge the battery as instructed in the Maintenance section your Operator's Manual prior to
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 11
    down position. The discharge chute deflector must be installed before operating the mower. 1. Remove the keys that are attached with a zip tie to Figure 3-6. Adjusting the Seat To adjust the position of the seat, pull up and hold the seat adjustment lever. Slide the seat forward or rearward to
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 12
    model. Not all features in this manual are applicable to all tractor models and the tractor depicted may differ from yours. NOTE: References to LEFT, RIGHT, FRONT, and REAR indicate that position on the tractor when facing forward while seated in the operator's seat instructions lower the mower deck.
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 13
    of the RH console. Seat Adjustment Lever The seat adjustment lever is located below the front/left of the seat. The lever allows for adjustment forward or backward of the operator's seat. Refer to the Assembly & Set-Up section for instructions on adjusting the seat position. Section 4 - Controls
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 14
    . OIL HOURS 1/10 PTO / BLADE PARK BRAKE NOTE: The hour meter is activated whenever the ignition switch is turned to the "ON" position. Keep a record of the actual hours of operation to assure all maintenance procedures are completed according to the instructions in this manual and the engine
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 15
    Cub Cadet Dealer. • The safety interlock system prevents the engine from cranking or starting unless the RH and LH drive control levers are moved fully outward in the neutral position and the PTO is disengaged. • The safety interlock system will shut off the engine if the operator leaves the seat
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 16
    the hour meter/indicator panel. If the battery indicator light or oil pressure light come on, immediately stop the engine. Have the tractor inspected by your Cub Cadet dealer. Cold Weather Starting When starting the engine at temperatures near or below freezing, ensure the correct viscosity motor
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 17
    zero turn tractor NOTE: Although the tractor's engine is designed to run at lap bar in the opposite direction slightly to take the load off the brakes and allow them to release fully. NOTE: If the control levers are not even in the neutral position, refer to Maintenance & Adjustments for instructions
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 18
    the tractor while driving forward, move the control levers as necessary so that one lever is rearward of the other. The tractor will turn in the direction of the rearward control lever. 1. To turn to the left, move the left drive control lever rearward of the right lever. See Fig. 5-4. Forward Left
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 19
    in reverse, move the left drive control lever forward of the right lever. See Fig. 5-7. Executing a Zero Turn WARNING! When executing a zero turn, the tractor MUST BE STOPPED. Executing a zero turn while the tractor is moving can significantly reduce your control of the tractor and will cause
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 20
    unless a pivot or zero turn is required. 7. Align the mower with an edge of the mowed strip and overlap approximately 3". 8. Direct the tractor on each subsequent strip to align with a previously cut strip. 9. To prevent rutting or grooving of the turf, if possible, change the direction that the
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 21
    designed, contact you Cub Cadet dealer to have turn the ignition switch to the start position; the engine should not crank. 2. Move both control levers fully inward in the neutral position; then lift upward from the operator's seat. The engine from the operator's seat; the engine should stop. 4.
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 22
    starting. Engine Refer to the Engine Manual for all engine maintenance intervals, procedures, specifications and instructions. Lubrication • Using a pressure lubricating gun, lubricate the front castor wheel axles with Cub Cadet 251H EP grease after every 10 hours of service. • Periodically
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 23
    charger clips to the battery while the charger is turned on, as it can cause sparks. • Keep before returning to service. Although the tractor may start, the engine charging system may each side of the tractor, to move the tractor manually without starting it. The transmission bypass rods are located
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 24
    Change the engine oil and filter following the instructions provided in the engine manual packed with this manual spindles, pulleys, bearings or the engine. The use of water will result in shortened life and reduce serviceability. Removing The Tractor From Storage 1. Check the engine oil the blades.
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 25
    to Tires for information regarding tire pressure. WARNING! Shut the engine off, remove the ignition key and engage the parking brake the left side of the deck by turning the adjustment gear. See Figure 6-4. The deck is properly leveled when both blade tip measurements are equal. Retighten the hex
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 26
    discharge opening of the cutting deck. The front gauge wheels on the mower deck are an anti-scalp feature, and should not ride on the ground rollers are in a storage position and do little or no rolling of the grass. Change the roller position as follows: 1. Remove the cotter pin from the right end
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 27
    . The procedures outlined below should be performed whenever the riding mower is placed in storage. 1. Change the engine oil and filter following the instructions provided in the Engine Manual. WARNING! Never store the riding mower with fuel in the tank indoors or in poorly ventilated enclosures
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 28
    you have a recurring problem with blown fuses, have the tractor's electrical system checked by your Cub Cadet Service Dealer. Relays and Cub Cadet Service Dealer. Deck Removal Remove the mower deck from the tractor as follows: 1. Move the tractor to a level surface, disengage the PTO, stop the engine
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 29
    WARNING! Use caution to avoid pinching your fingers when rolling the belt off the PTO pulley. Highest Mowing Position 3. Pull the left side of the belt rearward and downward while manually turning the PTO pulley to the right until the belt rides out onto the edge of the lower sheave of the pulley
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 30
    between the deck idler pulleys and the PTO pulley on the bottom of the engine. 9. Make certain the belt is in the spindle pulleys of the deck, and that the backside of the belt is against both the fixed and movable idler pulleys. Deck Lift Arm 10. Sitting behind the tractor, facing forward, make
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 31
    the belt from the spindle pulleys. 5. Install the new belt around the spindle pulleys as shown and reinstall the belt covers. See Figure 7-8. Flat Washer Hex Screw Figure 7-11 NOTE: Take note of the position of the belt guard to ensure they are properly re-installed. Section 7 - Service 31
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 32
    7-10. 7. Route the belt as shown in Figure 7-10 and then reinstall the deck (refer to Deck Installation on page 30). 50" & 54" Deck 1. Remove the Pulley Spacer Belt Guard Belt Guard Flange Lock Nut Idler Arm Flange Lock Nut Belt Guards Idler Pulley Spindle Pulley Idler Arm Spindle Pulley
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 33
    and the cutting edge of the blade to help in breaking loose the hex nut securing the blade. See Figure 7-14. Changing the Transmission Drive Belt Several components must be removed and special tools used in order to change the tractor's transmission drive belt. See your Cub Cadet dealer to have the
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 34
    Troubleshooting Problem Excessive vibration Uneven cut Mower will not mulch grass (If Equipped w/Mulching Kit) Cause 1. Cutting blade loose or unbalanced. 2. Damaged or bent cutting blade. 1. Deck not leveled properly. 2. Dull blade. 3. Uneven tire pressure. 1. Engine speed too low. 2. Wet grass.
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 35
    -04125B 618-06978 Deck Spindle, RZT L42 Deck Spindle, RZT L46 Deck Spindle, RZT L50 Deck Spindle, RZT L54 734-04155 Deck Wheel 925-1707D Battery 951-12179B Fuel Tank Cap Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 36
    L54 634-04212B 634-04711 Caster Wheel Assy., RZT L42 Caster Wheel Assy., RZT L46/50/54 Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also available free of charge at www.cubcadet.com 36
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 37
    -850-0014 22216 42" & 46" Bagger w/ Weight Kit 50" Bagger w/ Weight Kit 54" Twin Bagger w/ Weight Kit 42" Mulch Kit 46" Mulch Kit 50" Mulch Kit 54" Mulch Kit Rear Engine Guard Blade Removal Tool Oil Siphon Tractor Cover Oil Filter Wrench Spark Plug Wrench 16 oz. Tire & Tube Sealant by Tire Science
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 38
    your outdoor equipment engine or a part has failed due to abuse, neglect, improper maintenance, or unapproved modifications. You are responsible for presenting your outdoor equipment engine to MTD Consumer Group Inc's distribution center or service center as soon as the problem exists. The warranty
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 39
    eligible for warranty coverage. Further, the coverage under this warranty extends only to parts that were present on the off-road engine and equipment purchased. The following emission warranty parts are covered (if applicable): 1. Fuel Metering System • Cold start enrichment system (soft choke
  • Cub Cadet RZT L 54-KH | RZT L 54 KH Operator's Manual - Page 40
    CUB CADET LLC MANUFACTURER'S LIMITED WARRANTY FOR RESIDENTIAL ZERO-TURN ("RZT") MOWERS IMPORTANT: To obtain warranty coverage owner must present an original proof of purchase and applicable maintenance records to the servicing dealer. Please see the operator's manual for information on required
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
O
PERATOR
’
S
M
ANUAL
Safe Operation Practices • Set-Up • Operation •
Maintenance • Service • Troubleshooting •
Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
RZT L Series Tractor
Form No. 769-09343
(September 23, 2013)