Cuisinart CHW-12P1 Quick Reference
Cuisinart CHW-12P1 Manual
 |
View all Cuisinart CHW-12P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Cuisinart CHW-12P1 manual content summary:
- Cuisinart CHW-12P1 | Quick Reference - Page 1
Cleaning Your Coffeemaker: Filter basket, carafe and lid. Turn unit off and remove plug from outlet. Wash filter basket, carafe and lid in warm, soapy water and rinse thoroughly, or clean in upper rack of dishwasher. Dry after use. Wipe area under the filter basket with a damp cloth. NOTE: Do not - Cuisinart CHW-12P1 | Quick Reference - Page 2
Guide LED will flash. Set the time you want coffee to begin brewing (follow Set the Time instructions). Once complete, turn the Function knob to AUTO Set the Time instructions to program Coffeemaker to shut off 0 to 4 hours after brew cycle is finished. 12-Cup Programmable Coffeemaker & Hot Water - Cuisinart CHW-12P1 | Quick Reference - Page 3
Quick Reference Guide Setup and Use: Coffeemaker 1. Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes (see complete instructions on page 7 of your Instruction Booklet). Insert filter into the water filter holder. Open the water reservoir and insert filter into the - Cuisinart CHW-12P1 | Quick Reference - Page 4
, please read the entire Instruction Booklet. Helpful Hint! We recommend flushing both the Coffeemaker and Hot Water System before first use. 1. Coffeemaker: Fill the water reservoir with cold water and follow directions for using Coffeemaker. DO NOT ADD COFFEE! 2. Hot Water System: Follow
-
1 -
2 -
3 -
4
 |
 |
Decalcification:
Cleaning Your Hot Water System:
Cleaning Your Coffeemaker:
Filter basket, carafe and lid.
Turn unit off and remove plug from outlet.
Wash filter basket, carafe and lid in warm, soapy water and rinse
thoroughly, or clean in upper rack of dishwasher. Dry after use.
Wipe area under the filter basket with a damp cloth.
NOTE: DO NOT PUT
ANY WATER IN THE UNIT ONCE FILTER BASKET IS REMOVED.
To clean base, wipe with damp cloth.
Do not use any scouring agents or harsh cleaners on any parts of the
coffeemaker. Never immerse base of unit in water.
A flashing Clean light indicates unit needs to be decalcified. Fill the water reservoir to
capacity with 1/3 cup of white vinegar and 2/3 cup of water. Press the Clean button; when
light comes on, turn Coffeemaker on. Five beeps sound when Clean cycle is complete; unit
will shut off. Turn unit back on and if Clean light flashes, repeat process; if not, run a brew
cycle
with water only
. Unit is then ready to use
We recommend you decalcify your hot water system twice a year.
Dispense any water in your reservoir until the Add Water light flashes. Add 32 ounces of
white vinegar. Dispense 16 ounces of vinegar and discard; this will fill the inner tank. Let unit
sit for 20 minutes, then turn to Off and allow hot vinegar to cool. Drain internal reservoir over
sink by removing water release tab on bottom of unit. When vinegar has completely drained,
replace tab. Refill reservoir with water and drain water as directed above. Unit is now ready
to use.
PG-27136