Cuisinart CHW-12P1 Quick Reference - Page 1

Cuisinart CHW-12P1 Manual

Page 1 highlights

Cleaning Your Coffeemaker: Filter basket, carafe and lid. Turn unit off and remove plug from outlet. Wash filter basket, carafe and lid in warm, soapy water and rinse thoroughly, or clean in upper rack of dishwasher. Dry after use. Wipe area under the filter basket with a damp cloth. NOTE: Do not put any water in the unit once filter basket is removed. To clean base, wipe with damp cloth. Do not use any scouring agents or harsh cleaners on any parts of the coffeemaker. Never immerse base of unit in water. Decalcification: A flashing Clean light indicates unit needs to be decalcified. Fill the water reservoir to capacity with 1/3 cup of white vinegar and 2/3 cup of water. Press the Clean button; when light comes on, turn Coffeemaker on. Five beeps sound when Clean cycle is complete; unit will shut off. Turn unit back on and if Clean light flashes, repeat process; if not, run a brew cycle with water only. Unit is then ready to use Cleaning Your Hot Water System: We recommend you decalcify your hot water system twice a year. Dispense any water in your reservoir until the Add Water light flashes. Add 32 ounces of white vinegar. Dispense 16 ounces of vinegar and discard; this will fill the inner tank. Let unit sit for 20 minutes, then turn to Off and allow hot vinegar to cool. Drain internal reservoir over sink by removing water release tab on bottom of unit. When vinegar has completely drained, replace tab. Refill reservoir with water and drain water as directed above. Unit is now ready to use. PG-27136

  • 1
  • 2
  • 3
  • 4

Decalcification:
Cleaning Your Hot Water System:
Cleaning Your Coffeemaker:
Filter basket, carafe and lid.
Turn unit off and remove plug from outlet.
Wash filter basket, carafe and lid in warm, soapy water and rinse
thoroughly, or clean in upper rack of dishwasher. Dry after use.
Wipe area under the filter basket with a damp cloth.
NOTE: DO NOT PUT
ANY WATER IN THE UNIT ONCE FILTER BASKET IS REMOVED.
To clean base, wipe with damp cloth.
Do not use any scouring agents or harsh cleaners on any parts of the
coffeemaker. Never immerse base of unit in water.
A flashing Clean light indicates unit needs to be decalcified. Fill the water reservoir to
capacity with 1/3 cup of white vinegar and 2/3 cup of water. Press the Clean button; when
light comes on, turn Coffeemaker on. Five beeps sound when Clean cycle is complete; unit
will shut off. Turn unit back on and if Clean light flashes, repeat process; if not, run a brew
cycle
with water only
. Unit is then ready to use
We recommend you decalcify your hot water system twice a year.
Dispense any water in your reservoir until the Add Water light flashes. Add 32 ounces of
white vinegar. Dispense 16 ounces of vinegar and discard; this will fill the inner tank. Let unit
sit for 20 minutes, then turn to Off and allow hot vinegar to cool. Drain internal reservoir over
sink by removing water release tab on bottom of unit. When vinegar has completely drained,
replace tab. Refill reservoir with water and drain water as directed above. Unit is now ready
to use.
PG-27136