Cuisinart DCC 2600 DCC-2600 Manual - Page 7
Programming Your, Coffeemaker, Making Coffee - released
UPC - 086279024619
View all Cuisinart DCC 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PROGRAMMING YOUR COFFEEMAKER Setting the Clock When the coffeemaker is plugged in, 12:00 will appear until you set the time. Turn the Function Knob to CLOCK Hold down the Hour or Minute button until the clock begins flashing. Press either button to select the desired time. Hold buttons down to scroll through the digits, or press and release to advance one digit at a time. When scrolling, the numbers will advance slowly and then speed up. When the number displayed approaches the desired time, press and release to advance one digit at a time. Be sure the PM indicator is on if a PM time is desired. SETTING THE AUTO ON TIME When you turn the Function Knob to Prog it displays a previously selected auto-on time, or the default time (12:00pm). 1. Turn the Function knob to PROG Follow directions under SETTING THE CLOCK (above) to program your startbrew time. 2. Turn the Function knob to AUTO ON LCD will display the current time. 3. Press and release ON/OFF button A green light indicates that coffeemaker is in AUTO ON mode. A red light will come on when brew cycle begins. Both lights will go off when Keep Warm cycle ends. NOTE: To start brew time at the same time the next day, simply make sure the Function Knob is on AUTO ON and press and release ON/OFF button once more. Green AUTO ON light will go on. SETTING THE AUTO OFF TIME Turn the Function Knob to AUTO OFF Follow directions under SETTING THE CLOCK (above) to program your coffeemaker to shut off from 0 to 4 hours after brew cycle is finished. BEFORE BREWING YOUR FIRST POT OF COFFEE During the manufacturing process, dust can get trapped in your coffeemaker. We recommend flushing out the system before brewing your first pot of coffee. Simply fill the reservoir and power on the unit. (See steps #2 and #6 in MAKING COFFEE instructions, below). DO NOT ADD COFFEE! Once you've done that, brew a pot of real coffee and get ready to enjoy Cuisinart at its best! MAKING COFFEE Follow instructions in "Before Brewing Your First Pot of Coffee" above. 1. I nsert charcoal water filter Follow directions for the preparation and insertion of the filter on page 8. 2. F ill the water reservoir Open the reservoir cover by lifting it up. Pour in the desired amount of water using the water level indicator located at the side of the coffeemake window. 3. Set preferences a. Push the 1-4 cup button if you are brewing fewer than 5 cups. b. Press Regular or Bold button to select flavor strength.* c. Turn the Carafe Temperature dial to low(L), medium(M), or high(H) and heater plate will keep coffee at the temperature you select.* *Features will remain at selected settings until you change them. 4. Add the ground coffee Remove the filter basket by grasping the handle and lifting straight up, and then place it on the countertop. Insert a #4 paper filter or permanent filter. Be sure that the paper filter is completely open and fully inserted in the basket. It may help to fold and flatten the seams of a paper filter beforehand. Add 1 level scoop of ground coffee per cup. Adjust the amount according to taste.