Cuisinart DCC-755BK DCC-755 Manual - Page 7

Programming Your, Coffeemaker

Page 7 highlights

PROGRAMMING YOUR COFFEEMAKER Setting the Clock When the coffeemaker is plugged in, 12:00 will appear until you set the time. Hold down the Hour or Minute button until the clock begins flashing. Press either button to select the desired time. Hold buttons down to scroll through the digits, or press and release to advance one digit at a time. When scrolling, the numbers will advance slowly and then speed up. When the number displayed approaches the desired time, press and release to advance one digit at a time. Be sure the PM indicator is on if a PM time is desired. SETTING THE AUTO ON TIME 1. Press and hold the Program (PROG) button until the display flashes. You are now in program set mode. 2. Follow directions under SETTING THE CLOCK (above) to program your start-brew time. 3. Press the start button to exit program set mode. Mode will be exited automatically if no button is pushed. The Green indicator light should be illuminated to indicate that the Auto On function is on. NOTE: To start brew time at the same time the next day, simply press PROG. When green indicator light comes on, brewing will start at the time you've selected. CHARCOAL WATER FILTER Your coffeemaker comes with a charcoal water filter that eliminates chlorine, bad tastes and odors from tap water. Inserting the Water Filter • Remove the filter from polybag and soak it, fully immersed, in cold tap water for 15 minutes. • Lift the water filter holder out of the water reservoir (see diagram, page 5). • Press down on the filter compartment and pull toward you to open. • Place filter into the holder and snap it closed. Be careful - improper placement can tear the filter skin. • Flush filter by running cold tap water through holes in bottom of compartment for 10 seconds. • Allow the filter to drain completely. • Slide the water filter holder back into the channel in the water reservoir, pushing it down to the base of the unit. NOTE: We recommend changing the water filter every 60 days or after 60 uses, and more often if you have hard water. Replacement filters can be purchased in stores, by calling Cuisinart® Customer Service, or at www.cuisinart. com. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in,
12:00 will appear until you set the time.
Hold down the Hour or Minute button until
the clock begins flashing. Press either
button to select the desired time. Hold
buttons down to scroll through the digits,
or press and release to advance one digit
at a time. When scrolling, the numbers will
advance slowly and then speed up. When
the number displayed approaches the
desired time, press and release to advance
one digit at a time. Be sure the PM
indicator is on if a PM time is desired.
SETTING THE AUTO ON TIME
1. Press and hold the Program (PROG)
button until the display flashes. You
are now in program set mode.
2. Follow directions under SETTING
THE CLOCK (above) to program
your start-brew time.
3. Press the start button to exit program
set mode. Mode will be exited
automatically if no button is pushed.
The Green indicator light should be
illuminated to indicate that the Auto
On function is on.
NOTE:
To start brew time at the same time
the next day, simply press PROG. When
green indicator light comes on, brewing will
start at the time you’ve selected.
CHARCOAL WATER FILTER
Your coffeemaker comes with a
charcoal water filter that eliminates
chlorine, bad tastes and odors from
tap water.
Inserting the Water Filter
• Remove the filter from polybag and
soak it, fully immersed, in cold tap
water for 15 minutes.
• Lift the water filter holder out of the
water reservoir (see diagram, page 5).
• Press down on the filter compartment
and pull toward you to open.
• Place filter into the holder and snap
it closed. Be careful – improper
placement can tear the filter skin.
• Flush filter by running cold tap water
through holes in bottom of
compartment for 10 seconds.
• Allow the filter to drain completely.
• Slide the water filter holder back into
the channel in the water reservoir,
pushing it down to the base of the
unit.
NOTE: We recommend
changing the water filter
every 60 days or after
60 uses, and more
often if you have
hard water.
Replacement filters
can be purchased in
stores, by calling
Cuisinart
®
Customer
Service, or at
www.cuisinart.
com.