D-Link AC2600 User Manual - Page 42
Ipv4 - Pptp
View all D-Link AC2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Section 3 - Configuration IPv4 - PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. Click Save at any time to save the changes you have made on this page. PPTP Server Username Password Reconnect Mode Maximum Idle Time Enter the PPTP server IP address provided by your ISP. Enter the username provided by your ISP. Enter the password provided by your ISP. Select either Always on, On Demand, or Manual. Configurable when On Demand is selected. Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Address Mode Advanced Settings... Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. D-Link DIR-2640 User Manual 38