D-Link DAP-1350 Product Manual - Page 29
Static IP, Select, to manually enter the IP address, subnet mask, and default gateway addresses. - d link default ip
UPC - 790069329463
View all D-Link DAP-1350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Section 3 - Configuration Static IP Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses. LAN Connection Type: Select Static IP from the drop-down menu. IP Address: Enter the IP address of the access point. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask. Default Gateway: Enter the Gateway. This is usually the LAN or internal IP address of your router. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. You can enter the device name of the AP into your web browser to access the instead of IP address for configuration. If you are using the device name to connect, make sure that your PC and your DAP-1350 are on the same network. D-Link DAP-1350 User Manual 29