D-Link DAP-2662 Product Manual 1 - Page 8
Basic Installation, Hardware Setup, Con the Access Point
View all D-Link DAP-2662 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Basic Installation Basic Installation Hardware Setup To power on the DAP-2662, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into the LAN port of the DAP-2662, and the other end into a port on a 802.3at PoE switch. 2. Separately purchase a DPE-301GI PoE injector if you need to connect the Access Point without a 802.3at PoE Switch. 3. Separately purchase a power adaptor to plug into the power receptor of the DAP-2662 Configure the Access Point Computer with DHCP Server Computer with DHCP Server Computer with DHCP Server 8
Basic Installation
8
Basic Installation
Hardware Setup
To power on the DAP-2662, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into the LAN port of the DAP-2662, and the other end into a port on a 802.3at PoE switch.
2. Separately purchase a DPE-301GI PoE injector if you need to connect the Access Point without a 802.3at PoE Switch.
3. Separately purchase a power adaptor to plug into the power receptor of the DAP-2662
Configure the Access Point
Computer with DHCP Server
Computer with DHCP Server
Computer with DHCP Server