D-Link DCS-2100 Product Manual - Page 61
Reset Output, Trigger Condition - setup
UPC - 790069274107
View all D-Link DCS-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
DCS-2100 User's Manual All the time except for the above schedule: Delay second(s) before detecting next event: Take snapshots at second(s) after event: Trigger Condition: Reset Output: Trigger Action: Snapshot every second(s): Send snapshots by email: D-Link Systems, Inc. Using the DCS-2100 with an Internet Browser If you do not wish to set a schedule, this box must be checked. Sets the time delay before restarting to check the trigger condition when the current condition is triggered. After a snapshot is taken because of a trigger, another snapshot will be taken after the configured time in seconds. There are 4 conditions related to the digital input and three windows for motion detection. There can be multiple selections. Select the appropriate digital input condition according to the characteristics of the external device. High or low indicate external voltage input for level trigger, while rising or falling is for edge triggers. There are three windows shown for the names you defined for motion detection. Undefined will show instead of the window title if motion detection is not setup yet. An active, named motion window must be checked for motion detection to be possible. Check and save this option to reset the external device at the digital output back to the original state. There are four options for two actions regarding either trigger condition. They can have multiple selections. While choosing the trigger output alarm, the digital output will short both pins to connect the circuit of the attached external device; otherwise both pins will be open. While choosing to upload snapshots, the method can be either email or FTP. The snapshot names will be "videopre.jpg", videotrg.jpg", and "videopos.jpg" respectively for the snapshots before event, right upon event, and after event. The date and time suffix may be added according to the option. Confirm the external mail or FTP server settings in network configuration. The camera will send snapshots at the specified interval to the external server according to the chosen method. Remember this operation is dependent to the weekly schedule. Any upload action specified in the options above will use the method chosen here. The captured snapshot named "video.jpg" will be attached in the email with subject "Periodic snapshots." 61