D-Link DCS-2310L DCS-2310L Manual - Page 15
Removing the Bottom Panel, Using the Reset Button
View all D-Link DCS-2310L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Section 1: Product Overview Removing the Bottom Panel Step 1: Place the camera face down on a non-slip flat surface. Step 2: Carefully pry out the two protective rubber screw coverings using a thin flat blade. 2 Step 3: 3 Undo the two screws using a Philips #00 Screwdriver. 4 Step 4: Lift off the protective panel. Using the Reset Button Step 1: Follow the steps outlined in "Removing the Bottom Panel" above. Step 2: Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will reset the device to its factory settings. Step 3: Follow the steps outlined in "Reattaching the Bottom Panel" on page 16 D-Link DCS-2310L User Manual 2 15
15
D-Link DCS-2310L User Manual
Section 1: Product Overview
Removing the Bottom Panel
Step 1:
Place the camera face down on a non-slip flat surface.
Step 2:
Carefully pry out the two protective rubber screw coverings using a thin flat blade.
Step 3:
Undo the two screws using a Philips #00 Screwdriver.
Step 4:
Lift off the protective panel.
Using the Reset Button
Step 1:
Follow the steps outlined in "Removing the Bottom Panel" above.
Step 2:
Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will reset
the device to its factory settings.
Step 3:
Follow the steps outlined in "Reattaching the Bottom Panel" on page 16
2
2
3
4