D-Link DCS-2330L User Manual - Page 13
Removing the Bottom Panel - factory reset
View all D-Link DCS-2330L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Section 1: Product Overview Removing the Bottom Panel Step 1: Place the camera face down on a non-slip flat surface. Step 2: Carefully pry out the two protective rubber screw coverings using a thin flat blade. Step 3: Undo the two screws using a Philips #00 Screwdriver. 2 3 4 Step 4: Lift off the protective panel. If you need to install an SD Memory Card please skip to "Installing an SD Memory Card" on page 14. Using the Reset Button If you need to use the Reset Button follow these steps. Step 1: Follow the steps outlined in "Removing the Bottom Panel" on page 13. Step 2: Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will reset the device to it's factory settings. Step 3: Follow the steps outlined in "Reattaching the Bottom Panel" on page 14. 2 D-Link DCS-2330L User Manual 13