D-Link DCS-2330L Quick Installation Guide - Page 5
Zero Configuration Setup - d link setup
View all D-Link DCS-2330L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENGLISH Zero Configuration Setup The Zero Configuration Setup will only work with a registered Cloud Router and an active mydlink account. Your Cloud Router will automatically assign your network settings (both wired and wireless) to your camera, and add it to your mydlink account. If you do not have a D-Link Cloud Router, skip to the Easy Setup section. 1 Remove the rubber plug on the back of the camera. Then connect the Ethernet cable to the Ethernet port and press the rubber gasket that is attached to the cable firmly into the hole. 2 Connect the other end of the Ethernet cable to your D-Link Cloud Router and connect the camera's power adapter to a power outlet. If using a wireless connection: Press and hold the WPS button on the back of the camera for five seconds. The blue WPS status LED will start to blink. Then, press the WPS button on your Cloud Router within two minutes. 3 From any computer, open a web browser, go to http://www.mydlink. com and log into your account. Once mydlink detects your camera, a notice will appear that there is a new device detected. Click on your camera name from the New Devices list and then click Yes to add your camera. 4 For wireless connection, remove the Ethernet cable and reinstall the rubber cover for proper weatherproofing. Your setup is complete! 5 DCS-2330L