D-Link DCS-3411 Product Manual - Page 7
Hardware Installation - poe
View all D-Link DCS-3411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Section 1 - Product Overview Hardware Installation Attach the Antennas (DCS-3430 only) Locate the antennas included with your DCS-3430, and attach them to the antenna connectors located on the back of the DCS 3430. Connect the Ethernet Cable Connect an Ethernet cable to the network cable connector located on the Network Camera's back panel and attach it to the network. Attach the External Power Supply Attach the external power supply to the DC power input connector located on the Network Camera's back panel (labeled DC 12V) and connect it to an AC power outlet. Note: When you have a proper connection, the LED will turn green. The light may cycle on and off and your computer may show an intermittent loss of connectivity, this is normal until you have configured your Network Camera. Connect Using Power-Over-Ethernet Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3411/3430 will turn green to indicate a proper connection. D-Link DCS-3411/3430 User Manual 7