D-Link DCS-6110 Product Manual
D-Link DCS-6110 - SECURICAM Fixed Dome Network Camera Manual
 |
UPC - 790069314094
View all D-Link DCS-6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DCS-6110 manual content summary:
- D-Link DCS-6110 | Product Manual - Page 1
- D-Link DCS-6110 | Product Manual - Page 2
61 Firmware Update 62 Status 63 Device Info 63 Logs 64 Help 65 D-ViewCam Installation 66 Add a Camera 69 Fixed Dome Network Camera Features 74 Fixed Dome Network Camera Installation 75 Networking Basics 78 Check your IP address 78 Statically Assign an IP address 79 D-Link DCS-6110 User - D-Link DCS-6110 | Product Manual - Page 3
Table of Contents Reset and Restore 80 External I/O Port 81 Technical Specifications 82 Contacting Technical Support 84 Warranty 85 Registration 91 D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 4
Overview PPraocdkuacgteOCvoenrtevnietsw • D-Link DCS-6110 Fixed Dome Network Camera • CAT5 Ethernet Cable • Screws • Power Adapter • I/O Connector Plug • Dome Enclosure • Alignment Stencil • Ring Enclosure • Manual and Software on CD • Screw Driver • Quick Install Guide Note: Using - D-Link DCS-6110 | Product Manual - Page 5
Overview Introduction DCS-6110 Fixed Dome Network Camera is cost-effective and an ideal security solution providing high quality real-time videos in MPEG-4 and JPEG compression for small to medium-sized businesses, offices and homes. The DCS-6110 features 3G mobile video support, enabling you - D-Link DCS-6110 | Product Manual - Page 6
camera and adds it to the network. Sign up with one of the free Dynamic DNS services available on the web, to assign a name and domain to the camera (e.g.mycamera.dlinkddns.com). This allows users to remotely access the camera without having to remember the IP address. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 7
Section 1 - Product Overview • Supports a Variety of Protocols - The DCS-6110 supports a wide variety of protocols such as RTSP, FTP, SMTP, NTP and HTTP. In addition, it supports UPnP and DDNS. DDNS allows your camera to be accessed using a static host name rather than an IP address. UPnP allows - D-Link DCS-6110 | Product Manual - Page 8
the transmission speed of the network.The Ethernet port can also be used to power the camera by using a PoE switch. DI/DO Pan Screw Reset Button Reset is initiated when the reset button is pressed once and held until the power LED flashes through its cycle twice. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 9
Section 1 - Product Overview Hardware Overview LEDs Power/Activity LED D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 10
the alignment stencil are located. Insert the supplied plastic anchors into the drilled holes, and align the holes at the base of the camera with the plastic anchors. Once aligned, insert the provided screws through the holes. Use a screwdriver to tighten and secure. D-Link DCS-6110 User Manual 10 - D-Link DCS-6110 | Product Manual - Page 11
cable. Connect the supplied power cable from the camera to a power outlet. Connection with a PoE Switch If using a PoE switch, connect the network camera to the switch via an Ethernet cable, which will provide both power and data transmission over a single cable. D-Link DCS-6110 User Manual 11 - D-Link DCS-6110 | Product Manual - Page 12
Software Installation Turn on the computer and insert the D-Link DCS-6110 Autorun CD into the CD-ROM drive. The following step-by-step instructions begin software installation. The Installation Setup Wizard window will pop up. Click Next to continue. Click Next D-Link DCS-6110 User Manual 12 - D-Link DCS-6110 | Product Manual - Page 13
if you would like to change the destination of installation, otherwise click Install to continue. Note: Installation may take several minutes to complete. Click Install D-Link DCS-6110 User Manual 13 - D-Link DCS-6110 | Product Manual - Page 14
Section 2 - Installation To start the installation click Install. Note: The installation may take several minutes to complete. Click Finish to complete installation and the D-Link Installation Wizard window will pop up for camera configuration. Click Finish D-Link DCS-6110 User Manual 14 - D-Link DCS-6110 | Product Manual - Page 15
network, there will be a valid IP address displayed here. Note: A DHCP server is a device that supplies the same IP address. To begin setup, single-click on the DCS-6110 located in the camera list and click Manual Setup located on the left of the Installation Wizard. Click Manual Setup D-Link DCS - D-Link DCS-6110 | Product Manual - Page 16
Section 3 - Configuration Enter a password, and confirm the password for the admin ID and click Next. Note: The default administrator username is admin and the password may be left blank. The password can be changed after installation. Click Next D-Link DCS-6110 User Manual 16 - D-Link DCS-6110 | Product Manual - Page 17
18. Note: By using PPPoE, users can virtually dial from one machine to another over an Ethernet network, establish a point to point connection between them and then securely transport data packets over the connection. the setup screen as seen in page 19. Click Next D-Link DCS-6110 User Manual 17 - D-Link DCS-6110 | Product Manual - Page 18
box to obtain a new IP address every time the camera starts up. Click Next to continue. Click Next Select UPnP Port Forwarding if your router supports this function. If not, choose Manual to manually enter your port numbers. Click Next to continue. Click Next D-Link DCS-6110 User Manual 18 - D-Link DCS-6110 | Product Manual - Page 19
Section 3 - Configuration Click Next to continue. Click Next A window will pop up asking you if you want to access the DCS-6110 via mobile phone. Clicking Yes will set the video resolution to 176x144. D-Link DCS-6110 User Manual 19 - D-Link DCS-6110 | Product Manual - Page 20
confirm that the application was successfully configured. Click OK to continue. A new window will pop up displaying the links/addresses to access your device. Click Add to my favorite to save the address and then click Exit to complete the installation. Click Exit D-Link DCS-6110 User Manual 20 - D-Link DCS-6110 | Product Manual - Page 21
3 - Configuration Double-click DCS-6110 in the Installation Wizard window to launch the camera's web configuration page. Note: Please see the user manual for more information. Enter admin as the default username and leave the password blank. Click OK to continue. D-Link DCS-6110 User Manual 21 - D-Link DCS-6110 | Product Manual - Page 22
Section 3 - Configuration This section shows your camera's live video. You can control your settings using the buttons at the bottom. For more information on using the web configuration, please refer to the user manual. D-Link DCS-6110 User Manual 22 - D-Link DCS-6110 | Product Manual - Page 23
and adjust the focus range by moving the controller left and right until the image is clear; tighten the focus controller once completed. Tighten Loosen D-Link DCS-6110 User Manual 23 - D-Link DCS-6110 | Product Manual - Page 24
the dome enclosure over the network camera so that the LED sticker on the dome enclosure is properly aligned with the camera's LED dome enclosure. When attachment is successfully made, the line on the ring enclosure will be aligned with the line on the dome enclosure. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 25
your Network Camera (http://192.168.0.120) Note: In the example, this address is 192.168.0.120.Your address may differ. Type Admin in the user name field and leave the password blank by default. Note: You may refer to page 60 to change the password for your admin account. Click OK D-Link DCS-6110 - D-Link DCS-6110 | Product Manual - Page 26
Live Video Camera This section shows your camera's live video. You can control your settings using the buttons below. Zoom: "-" zooms out, and "+" zooms in MP4 Recording: Start and stop MP4 recording Pause: To pause live video Stop: Stop streaming live video D-Link DCS-6110 User Manual 26 - D-Link DCS-6110 | Product Manual - Page 27
Section 3 - Configuration Snapshot This section shows a snapshot image from your camera's live video. D-Link DCS-6110 User Manual 27 - D-Link DCS-6110 | Product Manual - Page 28
video quality. However, packet losses will diminish image quality when bandwidth becomes restricted. If the network is protected by a firewall and it opens HTTP port (80) only, HTTP protocol must a destination folder and prefix filename for the recorded video. D-Link DCS-6110 User Manual 28 - D-Link DCS-6110 | Product Manual - Page 29
wizard, click Manual Motion Detection Setup and skip to page 46. Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the Internet. Click Next to continue. Click Next D-Link DCS-6110 User Manual 29 - D-Link DCS-6110 | Product Manual - Page 30
page 32. Click Next Select PPPoE if the camera is directly connected to the Internet through a DSL modem, and the ISP (Internet Service Provider) requires you to use PPPoE for the Internet connection. Click Next to continue and skip to Step 2 on page 31. Click Next D-Link DCS-6110 User Manual 30 - D-Link DCS-6110 | Product Manual - Page 31
Internet Service Provider has provided you with connection settings, or you wish to set a static address within your home network. Click Next to continue. Click Next If you have selected PPPoE, enter your username and password. Click Next to continue. Click Next D-Link DCS-6110 User Manual 31 - D-Link DCS-6110 | Product Manual - Page 32
information. Click Next to continue. Click Next Enter a name for your camera and click Next to continue. Click Next Configure the correct time to ensure that all events will be triggered, captured and scheduled at the right time. Click Next to continue. Click Next D-Link DCS-6110 User Manual 32 - D-Link DCS-6110 | Product Manual - Page 33
to save your settings. Click Apply If you selected Static IP, you will see a summary of your camera's settings. Please note down all this information as you will need it for accessing your camera within the network. Click Apply to save your settings. Click Apply D-Link DCS-6110 User Manual 33 - D-Link DCS-6110 | Product Manual - Page 34
detection as well as control the sensitivity or your camera's ability to detect movement. Specify the window area, window name and sensitivity of detection as well as the type of recording (either snapshot of video clip). Then, click Next to continue. Click Next D-Link DCS-6110 User Manual 34 - D-Link DCS-6110 | Product Manual - Page 35
Click Next This step allows you to specify how you will receive the events notification of your camera, either via using email or FTP.You will need to enter all the relevant information for your email account or FTP settings. Then, click Next to continue. Click Next D-Link DCS-6110 User Manual 35 - D-Link DCS-6110 | Product Manual - Page 36
Section 3 - Configuration You have completed the Motion Detection Wizard. Click Apply to save your settings. Click Apply D-Link DCS-6110 User Manual 36 - D-Link DCS-6110 | Product Manual - Page 37
a network. Services and capabilities offered by networked devices, such as printing and file sharing, are available among each other without bothersome network configuration. In the case of Network Cameras, you will see Network Camera shortcuts at My Network Places. D-Link DCS-6110 User Manual 37 - D-Link DCS-6110 | Product Manual - Page 38
set to 8080, refer to the list below for the Network Camera's IP address. From the Internet http://203.67.124.123:8080 In a local area network http://192.168.4.160 or http://192.168.4.160:8080 against unauthorized accesses. HTTP Port: The default value is 80. D-Link DCS-6110 User Manual 38 - D-Link DCS-6110 | Product Manual - Page 39
Firefox or Netscape to access the Network Camera, and the video mode is set camera ip/live.sdp (live.sdp is the default access name, you can modify it here) Access name for The default name is live.sdp. stream1: Access name for The default name is live2.sdp. stream2: D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 40
> For example, when the access name for stream 1 is set to live.sdp: 1 : Launch a RTSP player. 2 : Choose File > Open URL. This opens the URL dialog box. 3 : Type the URL command in the text box. For example: 4 : The live video will be displayed in your player. D-Link DCS-6110 User Manual 40 - D-Link DCS-6110 | Product Manual - Page 41
camera audio and video streaming so that your cameras (sources) and the receivers (clients) can establish the connection to send and receive contents. An IP 239.1.1.1. Receivers for that content will inform the network that they are interested in receiving data packets Link DCS-6110 User Manual 41 - D-Link DCS-6110 | Product Manual - Page 42
RTCP video port: Default port number is 5561, or please choose between 1024 and 65534. Multicast RTCP audio port: Default port number is 5563, or please choose between 1024 and 65534. Multicast TTL {1~255 port changes, the multicast RTCP port will change accordingly. D-Link DCS-6110 User Manual 42 - D-Link DCS-6110 | Product Manual - Page 43
DNS host name and synchronize the public IP address of the modem when it has been modified. The username and password are required when using the DDNS service. Enable DDNS: Click to enable the Indicate the connection status, automatically determined by the system. D-Link DCS-6110 User Manual 43 - D-Link DCS-6110 | Product Manual - Page 44
the camera is being installed upside down. White balance: Choose either Auto or Fix white balance. Brightness: It has eleven levels ranged from -5 to +5 for you to choose. Overlay title and Select to add a date and time stamp directly on time stamp on the video. video: D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 45
MPEG4 consumes much less network bandwidth than JPEG. Fixed quality" to optimize the bandwidth utilization and video quality. If the User wants to fix the bandwidth utilization regardless of the video quality, choose "Constant bit rate" and select the desired bandwidth. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 46
up to three windows that can be created with different settings for monitoring. This allows your camera to serve as a security device that will record when motion is detected. Enable motion Check will close the window. Save: Save the related settings of that window. D-Link DCS-6110 User Manual 46 - D-Link DCS-6110 | Product Manual - Page 47
Indicator will rise or fall depending on the image variation. When motions are detected by the Network Camera and are judged to exceed the defined threshold, a red bar rises. Meanwhile, the motion are still falling under the defined threshold. D-Link DCS-6110 User Manual Percentage = 30% 47 - D-Link DCS-6110 | Product Manual - Page 48
while smaller sensitivity settings tend to neglect it. When the sensitivity is set to 70%, the Network Camera defines the pixels in the purple areas as "alerted pixels" (frame D). Percentage is a to set higher sensitivity settings and smaller percentage values. D-Link DCS-6110 User Manual 48 - D-Link DCS-6110 | Product Manual - Page 49
To utilize this feature, ensure to set the time zone of your network camera.Then starting and ending time of the DST is displayed upon selecting the manually. manually: Copy Your Computer's This will synchronize the time information from your PC. Time Settings: D-Link DCS-6110 User Manual 49 - D-Link DCS-6110 | Product Manual - Page 50
. 3. Click on the item name to pop up a window for modifying. Note: You can add up to three events, five servers and five media fields. D-Link DCS-6110 User Manual 50 - D-Link DCS-6110 | Product Manual - Page 51
A typical application is that when a motion is detected, the DCS-6110 Network Camera sends buffered images to a FTP server or via e-mail as and media columns first so that the Network Camera will know what action shall be performed when a trigger is activated. D-Link DCS-6110 User Manual 51 - D-Link DCS-6110 | Product Manual - Page 52
: Select this to enable and apply your email account setting for your camera. FTP: Select this to access a granted folder on the external FTP server. HTTP: Select this to use a web server to store the media. Network Storage: Only one network storage is supported. D-Link DCS-6110 User Manual 52 - D-Link DCS-6110 | Product Manual - Page 53
and System Log. Media Name: The unique name for media. Snapshot: Select this feature to enable camera to take snapshot. Source: The source of stream, stream1 or stream2. Send pre-event The System log: Select this feature to enable camera to display system log. D-Link DCS-6110 User Manual 53 - D-Link DCS-6110 | Product Manual - Page 54
Select this option to add date and time to the file name suffix. SNAPSHOTS20080104_100341 File name prefix Date and time suffix The format is: YYYYMMDD_HHMMSS D-Link DCS-6110 User Manual 54 - D-Link DCS-6110 | Product Manual - Page 55
example: If the Pre-event recording is set to five seconds and the Maximum duration is set to ten seconds, the Network Camera continues to record for another four seconds after a trigger is activated. 1 sec. 2 sec. 3 sec. 4 sec suffix The format is: YYYYMMDD_HHMMSS D-Link DCS-6110 User Manual 55 - D-Link DCS-6110 | Product Manual - Page 56
in specified intervals. The unit of trigger interval is minute. Digital input: External trigger input to the camera. System boot: The event is triggered when the system boot up. Time: Select Always or enter the triggering the D/O and storing the media on a CF card. D-Link DCS-6110 User Manual 56 - D-Link DCS-6110 | Product Manual - Page 57
6MB, and the total cycling recording size is 600MB, then camera will recording 100 files to the specified location (folder). And then the camera will delete the oldest file and create new file for cycling recording be added on the file name of the recording file(s). D-Link DCS-6110 User Manual 57 - D-Link DCS-6110 | Product Manual - Page 58
list is set from 1.1.1.0 to 192.255.255.255 and the range of denied list is set from 1.1.1.0 to 170.255.255.255, Only users' IP located between 171.0.0.0 and 192.25.25.25 can access the Network Camera. Alowed List Denied List D-Link DCS-6110 User Manual 58 - D-Link DCS-6110 | Product Manual - Page 59
used for connecting such external alarm devices as IR-Sensors and alarm relays to the network camera. DI and DO: Setting for both Digital input signal and digital output signal of the digital output. The camera will show whether the trigger is activated or not. D-Link DCS-6110 User Manual 59 - D-Link DCS-6110 | Product Manual - Page 60
: Managing the accounts for the existing users. Authentication: The access right for the existing users. Camera Name: Create a unique name for your camera and you can access the camera using this name in your web-browser. For example: http://DCS-6110 (By default). D-Link DCS-6110 User Manual 60 - D-Link DCS-6110 | Product Manual - Page 61
the operation of the network camera. Restore: Click the Restore button to reset the camera back to its factory default settings. This will remove all the configuration settings that were made previously. Reboot: Click the Reboot button to restart the camera. D-Link DCS-6110 User Manual 61 - D-Link DCS-6110 | Product Manual - Page 62
will be displayed on your screen. You may go to the D-Link Support page to check for the latest firmware version available. To upgrade the firmware on your DCS-6110, please download and save the latest firmware version from the D-Link Support page to your local hard drive. Locate the file on your - D-Link DCS-6110 | Product Manual - Page 63
Section 3 - Configuration Status Device Info This page displays all the details information about your device and network connection. D-Link DCS-6110 User Manual 63 - D-Link DCS-6110 | Product Manual - Page 64
so that the camera can send camera log files to a remote server. Log server settings: Configure the setting for the log server. IP Address: The IP address of the reveals useful information about camera configuration and connectivity status after the camera boots up. D-Link DCS-6110 User Manual 64 - D-Link DCS-6110 | Product Manual - Page 65
Section 3 - Configuration Help D-Link DCS-6110 User Manual 65 - D-Link DCS-6110 | Product Manual - Page 66
the administrator to manage up to 32 D-Link network cameras remotely. The administrator can use the software to configure the advances settings for the camera. D-ViewCam is a complete management tool and . Select a language version and click OK to continue. Click OK D-Link DCS-6110 User Manual 66 - D-Link DCS-6110 | Product Manual - Page 67
Section 4 - D-ViewCam Installation Click Next to continue. Click Next Click Browse if you would like to choose a specific folder for the installation, otherwise click Next to continue. Click Next D-Link DCS-6110 User Manual 67 - D-Link DCS-6110 | Product Manual - Page 68
Section 4 - D-ViewCam Installation Click Next to start the installation. Note: The D-ViewCam installation process may take several minutes to complete. Click Next Click Finish to complete the installation. Click Finish D-Link DCS-6110 User Manual 68 - D-Link DCS-6110 | Product Manual - Page 69
Programs > D-Link > D-Link D-ViewCam. Enter admin as the default username and leave the password blank. Click / OK to log into the system and access the Add Camera Wizard. Note: Please refer to page 48 in the D-ViewCam user manual to change your password. Click OK D-Link DCS-6110 User Manual 69 - D-Link DCS-6110 | Product Manual - Page 70
Section 4 - D-ViewCam Installation Welcome to the Add Camera Wizard. Use this wizard to add your cameras to the D-ViewCam system. Note: Use the left or right arrow to navigate the wizard. Click / Next to continue. Click Next D-Link DCS-6110 User Manual 70 - D-Link DCS-6110 | Product Manual - Page 71
all cameras that are located on the same LAN with same subnet. The system will place all the cameras at the default map called My Map. Click Next to continue. If you choose Add Manually, you will need to enter the IP address of the camera(s). Click Next to continue. D-Link DCS-6110 User Manual 71 - D-Link DCS-6110 | Product Manual - Page 72
shows the detected network camera(s) information. You can choose and schedule the recording for each camera. • 24/7 schedule recording modes can only record when motion is detected. Please refer to the user manual for more information.on. Click Next to continue. D-Link DCS-6110 User Manual 72 - D-Link DCS-6110 | Product Manual - Page 73
additional camera(s) to add. Click Next to continue. The Add Camera wizard is now complete. Click Close to access the D-ViewCam's main screen. Your D-ViewCam Installation is Complete! Note: Please refer to the D-ViewCam user manual for information about using D-ViewCam. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 74
Fixed Dome Network Camera utilizes MPEG-4 simple profile or MJPEG Mode image compression technology providing high quality images. MJPEG is a standard for image compression and it can be applied to various web browsers and application software without installing any extra software D-Link DCS-6110 - D-Link DCS-6110 | Product Manual - Page 75
Network Camera can be connected to a LAN with private IP addresses. 5. Can the Fixed Dome Network Camera be installed and work if a firewall exists on the network? If a firewall exists on the network, port 80 is open for ordinary data communication. The DCS-6110 uses port 5002 for streaming audio - D-Link DCS-6110 | Product Manual - Page 76
Wizard icon is clicked on more than once from the setup wizard. 9. Grainy images occur. How can I solve the problem? The video images might be grainy if the Fixed Dome Network Camera is used in a very low light environment. To solve this issue you need more lighting. D-Link DCS-6110 User Manual 76 - D-Link DCS-6110 | Product Manual - Page 77
configuration on the Fixed Dome Network Camera image display is incorrect. Through the Setup > Image Setup section of the Web management you need to adjust the image related parameters such as brightness, white balance and power line frequency for fluorescent light. D-Link DCS-6110 User Manual 77 - D-Link DCS-6110 | Product Manual - Page 78
the IP address, software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 79
as the LAN IP address of your access point (192.168.0.1). Set Primary DNS the same as the LAN IP address of your access point (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DCS-6110 User Manual 79 - D-Link DCS-6110 | Product Manual - Page 80
Wizard to return the DCS-6110 to a normal state. 2. Wait for the LED on the front of the camera to blink red and green and hold the button for 30 seconds. 3. Withdraw the tool after the second cycle of the LED blinking and a factory restore has been completed. D-Link DCS-6110 User Manual 80 - D-Link DCS-6110 | Product Manual - Page 81
input (DI) that is used for connecting a diversity of external alarm devices to the Network Camera such as IR-Sensors and alarm relays. I/O Terminal Block: External I/O Port The digital PIN 4 Ground 1 Power 2 Digital Output 3 Digital input(DI+) 4 Ground(DI-) D-Link DCS-6110 User Manual 81 - D-Link DCS-6110 | Product Manual - Page 82
support for Full-Duplex mode • Supported IEEE 802.3af standard (PoE) SURVEILLANCE SOFTWARE FUNCTIONS • Remote management/control of up to 32 cameras • Viewing of up to 32 cameras on one screen • Supports all management functions provided in web interface • Scheduled motion triggered, or manual - D-Link DCS-6110 | Product Manual - Page 83
Netscape, Mozilla, Opera browser SUPPORTED PDA, MOBILE PHONES & SOFTWARE Handsets with 3GPP player • support and subscribe to 3G service from the phone service provider. The playback device must be equipped with 3G video playback such as RealPlayerTM or PacketVideoTM. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 84
technical support, please have the following ready: • Model number of the product (e.g. DCS-6110) • Hardware Revision (located on the label on the bottom of the network camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the network camera). You can find software - D-Link DCS-6110 | Product Manual - Page 85
the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DCS-6110 User Manual 85 - D-Link DCS-6110 | Product Manual - Page 86
Link's option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link's functional specifications for the Software or to refund the portion of the actual purchase price D-Link Technical Support at dlink.com/. D-Link DCS-6110 User Manual 86 - D-Link DCS-6110 | Product Manual - Page 87
manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link NONINFRINGEMENT. D-Link DCS-6110 User Manual 87 - D-Link DCS-6110 | Product Manual - Page 88
from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2008 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DCS-6110 User Manual 88 - D-Link DCS-6110 | Product Manual - Page 89
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DCS-6110 User Manual - D-Link DCS-6110 | Product Manual - Page 90
applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Notice: This device complies with RSS-210 of the Industry per regulations of Industry Canada. The required antenna impedance is 50 ohms. D-Link DCS-6110 User Manual 90 - D-Link DCS-6110 | Product Manual - Page 91
Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 May 2, 2008 D-Link DCS-6110 User Manual 91
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
 |
 |
