Home » D-Link Manuals » Webcams » D-Link DCS-6620G » Manual Viewer

D-Link DCS-6620G Product Manual

D-Link DCS-6620G - Network Camera Manual

UPC - 790069277085

View all D-Link DCS-6620G manuals

Add to My Manuals
Save this manual to your list of manuals

D-Link DCS-6620G manual content summary:

D-Link DCS-6620G | Product Manual - Page 1
D-Link DCS-6620G | Product Manual - Page 2
...6 Hardware Installation 9 Installation Wizard 10 Installation Wizard Screen 15 Enabling UPnPTM for Windows® XP 18 Installing IP surveillance Software 22 Testing the DCS-6620G 26 Security ...27 Using and Conﬁguring the DCS-6620G with a Router 28 Using the DCS-6620G with an Internet Browser
D-Link DCS-6620G | Product Manual - Page 3
DCS-6620G User's Manual Package Contents Package Contents  D-Link SECURICAM DCS-6620G 802.11g PTZ Internet Camera  Remote Control  12V AC Power Adapter  A/V Cables  2 Antennas  Category 5 Ethernet Cable  Camera Stand  Quick Installation Guide  Installation software and manual on CD If any
D-Link DCS-6620G | Product Manual - Page 4
DCS-6620G User's Manual Introduction Introduction The D-Link SECURICAM Network DCS-6620G 802.11g PTZ (Pan, Tilt, and Zoom) Internet Camera is a full featured surveillance system that connects to an Ethernet, Fast Ethernet wireless or broadband Internet connection to provide remote highquality 2-
D-Link DCS-6620G | Product Manual - Page 5
, and HTTP. The camera also supports UPnP and DDNS. DDNS allows the camera to use an easier to remember naming format rather than an IP address. UPnP will allow users of Windows® XP to install the camera with the click of a mouse. A/V Output The SECURICAM Network DCS-6620G comes with an A/V output
D-Link DCS-6620G | Product Manual - Page 6
with a wireless network. Ethernet 10/100 RJ-45 socket The DCS-6620G back panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling. This network port supports the NWay protocol, allowing the 802.11g PTZ Internet Camera to automatically
D-Link DCS-6620G | Product Manual - Page 7
Panel Socket for stand Attachment socket for the Camera Stand Located on the bottom panel of the DCS-6620G, the socket is used to connect the camera stand to the 802.11g PTZ Internet Camera by attaching the screw head on the camera stand to the 802.11g PTZ Internet Camera. D-Link Systems, Inc. 7
D-Link DCS-6620G | Product Manual - Page 8
DCS-6620G User's Manual Connections Infrared Remote Control Included with the DCS-6620G is an infrared remote control. You have the option of controlling the camera via the Pan/Tilt/Zoom Controls using the IP surveillance software, Internet Explorer, or via the infrared remote. To use the remote,
D-Link DCS-6620G | Product Manual - Page 9
. 3 Attach the Antennas Attach the two antennas to the connectors located on the back panel of the DCS-6620G. Power source is conﬁrmed when the LED Power Indicator on the 802.11g PTZ Internet Camera is illuminated. Power LED LED stands for Light-Emitting Diode. The Power LED is positioned in the
D-Link DCS-6620G | Product Manual - Page 10
DCS-6620G User's Manual Installation Wizard Installation Wizard After you have successfully completed the hardware installation of the DCS-6620G 802.11g PTZ Internet Camera, it is necessary to install software to conﬁgure and operate the camera. The ﬁrst step is to install the Installation Wizard
D-Link DCS-6620G | Product Manual - Page 11
DCS-6620G User's Manual Installation Wizard Click Install Wizard Please wait while the InstallShield Wizard prepares to install. Click Next D-Link Systems, Inc. 11
D-Link DCS-6620G | Product Manual - Page 12
DCS-6620G User's Manual The InstallShield will install in the following folder. To install into a different folder, click Browse and select another folder. the existing folders list. Click Next Please wait while the Installation Wizard is installed. Installation Wizard D-Link Systems, Inc. 12
D-Link DCS-6620G | Product Manual - Page 13
DCS-6620G User's Manual Installation is now complete. Installation Wizard Click Finish. To access the Installation Wizard screen, click on the Installation Wizard Icon on your desktop. The opening Installation Wizard screen will appear and show a MAC address of the DCS-6620G and an IP Address (
D-Link DCS-6620G | Product Manual - Page 14
DCS-6620G User's Manual Installation Wizard The Installation Wizard will now show a MAC address for the DCS-6620G and an IP address. This IP address may not be correct at this step in the installation until you see "Yes" under the assigned column. The camera is now automatically conﬁgured with an
D-Link DCS-6620G | Product Manual - Page 15
6620G 802.11g PTZ Internet Camera. You have now completed the Setup Wizard and are ready to use your camera! You can also continue to the section titled "Installing IP surveillance Software" (page 22) to install the IP surveillance software before you begin to use the DCS-6620G. Installation Wizard
D-Link DCS-6620G | Product Manual - Page 16
DCS-6620G User's Manual Installation Wizard Screen Setup On the initial Setup Screen you can conﬁgure System and Date/Time settings for each camera. Click Next to conﬁgure Network settings for the camera. System Enter a Camera Name and create an Settings: Admin password for the camera. Date/Time
D-Link DCS-6620G | Product Manual - Page 17
DCS-6620G User's Manual Installation Wizard Screen Click Next and then Apply to save the configured settings. Users can click Previous to modify changes or mistakes. Upgrade The upgrade window allows users to upload a saved firmware file. If the firmware is older than that currently on the camera, a
D-Link DCS-6620G | Product Manual - Page 18
User's Manual Enabling UPnPTM for Windows® XP Enabling UPnPTM for Windows® XP UPnPTM is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The DCS-6620G is a UPnP enabled 802.11g PTZ Internet
D-Link DCS-6620G | Product Manual - Page 19
DCS-6620G User's Manual Enabling UPnPTM for Windows® XP Click Add/Remove Windows Components The following screen will appear: Select Networking Services Click Details Select Universal Plug and Play Click Ok D-Link Systems, Inc. 19
D-Link DCS-6620G | Product Manual - Page 20
DCS-6620G User's Manual Enabling UPnPTM for Windows® XP Click Next Please wait while Setup configures the components. Click Finish D-Link Systems, Inc. 20
D-Link DCS-6620G | Product Manual - Page 21
DCS-6620G User's Manual Enabling UPnPTM for Windows® XP To view your DCS-6620G 802.11g PTZ Internet Camera in an Internet browser, go to your Desktop and click My Network Places. Click My Network Places Click DCS-6620G-146 The last three digits (146), represent the fourth octet of your 802.11g
D-Link DCS-6620G | Product Manual - Page 22
DCS-6620G User's Manual Installing IP surveillance Software Installing IP Surveillance Software The IP surveillance Software on the CD included with the DCS-6620G 802.11g PTZ Internet Camera converts the DCS-6620G into a powerful, yet ﬂexible, surveillance system for home or business, with the
D-Link DCS-6620G | Product Manual - Page 23
DCS-6620G User's Manual Installing IP surveillance Software Click Yes Please read the Software Licensing Agreement and click yes if you wish to accept the agreement. Click "No" to exit the installation. Click Next Enter your name and company information and then click "Next". D-Link Systems, Inc
D-Link DCS-6620G | Product Manual - Page 24
DCS-6620G User's Manual Installing IP surveillance Software Select the destination directory. Click Next Select the program folder the software will be installed into. Click Next D-Link Systems, Inc. 24
D-Link DCS-6620G | Product Manual - Page 25
DCS-6620G User's Manual Installing IP surveillance Software Click Next Click Finish The installation is complete. D-Link Systems, Inc. 25
D-Link DCS-6620G | Product Manual - Page 26
6620G User's Manual Testing the DCS-6620G Open your Internet browser and type in the IP address of the DCS-6620G. In this example the address is: http://192.168.0.120 (your DCS-6620G may have a different IP address based on what you found with the Installation Wizard program). Testing the DCS-6620G
D-Link DCS-6620G | Product Manual - Page 27
DCS-6620G User's Manual Security Security At this 802.11g PTZ Internet Camera. When the 802.11g PTZ Internet Camera is used for the ﬁrst time, it is highly recommended that the Administrator set the Administrator Password to constrain user access to the 802.11g PTZ Internet Camera since the Default
D-Link DCS-6620G | Product Manual - Page 28
Link DI-624 Wireless Router • Ethernet based PC for system conﬁguration SETTING UP THE DCS-6620G FOR USE BEHIND A ROUTER Installing a DCS-6620G 802.11g PTZ Internet Camera on your network is an easy 4-step procedure:  Assign a local IP Address to your 802.11g PTZ Internet Camera  View the 802.11g
D-Link DCS-6620G | Product Manual - Page 29
a different IP Address.  View the 802.11g PTZ Internet Camera using your Internet Explorer Web browser Run your Internet Explorer Web browser. In the address bar, type in the IP Address that was assigned to the 802.11g PTZ Internet Camera by the Installation Wizard program. The DCS-6620G Home Page
D-Link DCS-6620G | Product Manual - Page 30
DCS-6620G User's Manual Using and Conﬁguring the DCS-6620G with a Router These are the port settings for your camera. If necessary, these ports can be changed if they are already in use by other devices (e.g. in a multiple camera environment). Router Set-Up and Installation The following steps
D-Link DCS-6620G | Product Manual - Page 31
DCS-6620G User's Manual Using and Conﬁguring the DCS-6620G with a Router Your WAN IP Address will be listed here. Determine Your Router's IP Address (WAN) Note: Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A
D-Link DCS-6620G | Product Manual - Page 32
DCS-6620G User's Manual Using and Conﬁguring the DCS-6620G with a Router Follow these steps to conﬁgure your router's Virtual Server settings • Click Enabled. • Enter a unique name for each entry. • Select Both under Protocol Type (TCP and UDP) • Enter your camera's local IP Address (e.g., 192.168
D-Link DCS-6620G | Product Manual - Page 33
Conﬁguring the DCS-6620G with a Router Viewing Your Camera After all settings have been entered correctly, a PC user inside or outside your network will have access to the camera through the Internet Explorer Web browser. To access the camera from the Internet, type the IP Address of the router
D-Link DCS-6620G | Product Manual - Page 34
an operating DCS-6620G 802.11g PTZ Internet Camera conﬁgured with the Installer program.You also have installed the IP surveillance software from the CD. This section of the manual will deal with using the 802.11g PTZ Internet Camera in two parts:  Using the DCS-6620G with an Internet browser and
D-Link DCS-6620G | Product Manual - Page 35
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Home Page Screen The image from the DCS-6620G should be visible from the Home page on your computer monitor. To the right of the image are controls that allow you to pan and tilt the camera. Pan and tilt can also be controlled
D-Link DCS-6620G | Product Manual - Page 36
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Home Page Screen (continued) The image from the DCS-6620G should be visible from the Home page on your computer monitor. There are two buttons on the left side of the Home page: Client Settings
D-Link DCS-6620G | Product Manual - Page 37
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Home > Client Settings The following options are available from the Connections settings screen: Media Options Allows the User to determine whether to recieve Video & Audio, Video Only, or Audio Only. Protocol Options The UDP
D-Link DCS-6620G | Product Manual - Page 38
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Home > Configuration Click on the Configuration button on the Home page: Click Configuration There are 5 tabs across the top of the Configuration screen. From each tab, different elements of the DCS-6620G can be configured. The
D-Link DCS-6620G | Product Manual - Page 39
-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Network (continued) Reset IP Address at next boot Once the DCS-6620G is conﬁgured, this box should be unchecked at all times. If the box has been checked and the connection is lost, run Installation Wizard
D-Link DCS-6620G | Product Manual - Page 40
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Configuration > Advanced > Network (continued) WLAN Configuration Settings (continued) SSID: (Service Set Identifier) is a name that identifies your wireless network. Access Points and wireless clients attempting to connect to a
D-Link DCS-6620G | Product Manual - Page 41
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Network (continued) Default key: This will preset 4 separate keys that you can choose at a later time. Click that control sending images via e-mail or FTP. Click Mail & FTP D-Link Systems, Inc. 41
D-Link DCS-6620G | Product Manual - Page 42
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Mail & FTP (continued) SMTP SMTP (mail) server 1: The domain name or IP address of external mail server. SMTP account name 1: The user name used to log into your e-mail account (e.g. jdoe or jdoe@
D-Link DCS-6620G | Product Manual - Page 43
cause the DCS-6620G to not respond. Change the conﬁguration settings only if necessary. Consult with your network administrator or your Internet Service Provider (ISP) if you do not have the necessary information. If you cannot connect to the camera, refer to page 132 for camera reset and restore
D-Link DCS-6620G | Product Manual - Page 44
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > DDNS & UPnP Click the DDNS & UPnP button from the Conﬁguration screen to access DDNS & UPnP settings. Click DDNS & UPnP Dynamic DNS (DDNS) Dynamic DNS (Domain Name Service) is a method of keeping a
D-Link DCS-6620G | Product Manual - Page 45
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > DDNS & UPnP architecture that provides compatibility among networking equipment, software, and peripherals. The DCS-6620G is a UPnP enabled 802.11g PTZ Internet Camera. If your operating system is UPnP
D-Link DCS-6620G | Product Manual - Page 46
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Video Click the Video button from the Conﬁguration screen to . To decode a P frame need the information of previous frame. MPEG4 consumes much less network bandwidth than MJPEG. D-Link Systems, Inc. 46
D-Link DCS-6620G | Product Manual - Page 47
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Video (continued) Key frame : Improve efﬁciancy in the multi-user environment: Horizontally rotate the video. Check options both if the Network Camera is installed upside down. Check this option to
D-Link DCS-6620G | Product Manual - Page 48
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Audio Click the at the same time. In this mode, the User can talk to the server while listening sound from the server simultaneously. In this mode, the User can talk to the server or listen from the
D-Link DCS-6620G | Product Manual - Page 49
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced all the other clients. If the Network Camera works in versatile or low network bandwidth environment, the User can check this option to improving audio quality normal performance. D-Link Systems, Inc. 49
D-Link DCS-6620G | Product Manual - Page 50
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Recommendations for setting video for the best performance (continued): Recording settings to compromise between Conﬁguration screen to access additional settings that affect how the video image appears. D-Link Systems, Inc. 50
D-Link DCS-6620G | Product Manual - Page 51
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Image Setting ( in poor illuminative environments. Apply when the DCS-6620G is aiming outdoors. Adjusting the 9 levels of white levels can help the camera to capture video with correct colors. 51
D-Link DCS-6620G | Product Manual - Page 52
DCS-6620G User's Manual Using the DCS-6620G with an Internet ", will convert the video to black and white automatically, if the camera is aiming at a dark environment. This option is for back light settings that effect how the DCS-6620G PTZ Internet Camera can serve as a security device by
D-Link DCS-6620G | Product Manual - Page 53
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Motion Detection (continued) can have up to 3 windows selected for motion detection).You can return to the DCS-6620G Home Page and the monitored window will not be visible, but the red frame will show
D-Link DCS-6620G | Product Manual - Page 54
-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Camera Control Click the Camera Control button from the Conﬁguration screen to access settings that affect how the DCS-6620G 802.11g PTZ Internet Camera can pan and move to preset locations. Click Camera
D-Link DCS-6620G | Product Manual - Page 55
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Advanced > Camera Control (continued) Current Position: Preset Position: Dwelling Time: Enable IR Control: Zoom times display: Patrol Selection: Enter a name for the position at which you would like to preset the
D-Link DCS-6620G | Product Manual - Page 56
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Tools > Admin Click on the Tools tab to access 4 utility screens for controlling and administering the DCS-6620G. The default screen in Tools is the Admin screen. The DCS-6620G is manufactured without any
D-Link DCS-6620G | Product Manual - Page 57
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Tools > Admin (continued) Guest account: This option allows a user to connect to a camera with view -only privileges. User name is "demo". No password is required. This is useful for demonstrations and keeps
D-Link DCS-6620G | Product Manual - Page 58
with the NTP server over the Internet whenever the DCS-6620G starts up. It will fail if the assigned timeserver cannot be reached. NTP server: Assign the IP address or domain name of the timeserver. Leaving the text box blank will let DCS-6620G connect to default time servers. Time zone: Used to
D-Link DCS-6620G | Product Manual - Page 59
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Tools > Applications Click on the Applications button to access the Applications settings from the Tools menu. D-Link Systems, Inc. 59
D-Link DCS-6620G | Product Manual - Page 60
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Tools > Applications (continued) current condition is triggered. Take snapshots at second(s) after event: Trigger condition: Reset output: After a snapshot is taken because of a trigger, another snapshot will
D-Link DCS-6620G | Product Manual - Page 61
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Configuration > Tools > Applications (continued) Trigger action: There are four options for two actions file named "video.jpg" on the external FTP server will be refreshed at the specified interval. D-Link Systems, Inc. 61
D-Link DCS-6620G | Product Manual - Page 62
, the system will restart and require the Installation Wizard software program to locate the IP address of the DCS-6620G. Click Apply under Calibrate to restore them camera's factory lens position. This means that the camera will be recalibrated to the default center to position to recover from any
D-Link DCS-6620G | Product Manual - Page 63
lists the following important settings that are currently set for the DCS-6620G • Firmware Version number • Mac Address • IP Address • Subnet Mask • Default router address • Primary DNS Address • Secondary DNS Address Conﬁguration > Status > Log Click on the Log button to access
D-Link DCS-6620G | Product Manual - Page 64
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Conﬁguration > Help Click on the Help tab to access descriptions of the particular function you need help with. The help screen is organized in the order of the tabs and then each menu item under that tab. D-Link Systems, Inc.
D-Link DCS-6620G | Product Manual - Page 65
DCS-6620G User's Manual Record Snapshots to your FTP from the Conﬁguration screen to access settings that affect how the DCS-6620G 802.11g PTZ Internet Camera can serve as a security device by recording only when motion is detected on save to enable the activity display. D-Link Systems, Inc. 65
D-Link DCS-6620G | Product Manual - Page 66
DCS-6620G User's Manual Record Snapshots to your FTP server with Motion Detection Next, click the Mail & FTP button under the Advanced tab to set the FTP server settings for the DCS-6620G. Click Mail & FTP 1 123.123.123.1 2 John Smith 3 4 Snapshot 5 6 In this window, enter the settings
D-Link DCS-6620G | Product Manual - Page 67
: server if your camera is behind a router protected by a firewall. For detailed information about each setting, please refer to Configuration > Advanced > Network in the section titled "Using the DCS-6620G With an Internet Browser" (page 34). Click the apply button when finished. D-Link Systems, Inc
D-Link DCS-6620G | Product Manual - Page 68
DCS-6620G User's Manual Record Snapshots to your FTP server with Motion Detection Next, click the Applications button under the Tools tab to set the application settings for the DCS-6620G. Click Applications snapshots to your FTP server when motion detection is triggered. D-Link Systems, Inc. 68
D-Link DCS-6620G | Product Manual - Page 69
DCS-6620G User's Manual Using IP surveillance Software Using IP surveillance Software Installing the IP surveillance Software Before you begin installing this application software, the hardware system requirements must be checked ﬁrst. The minimum system requirements recommended for this
D-Link DCS-6620G | Product Manual - Page 70
DCS-6620G User's Manual Using IP surveillance Software Installing the IP surveillance Software (continued) Click Next The "License Agreement" window below will appear. Please read the following license agreement carefully. Click "Yes" to accept this agreement and proceed with the installation.
D-Link DCS-6620G | Product Manual - Page 71
DCS-6620G User's Manual Using IP surveillance Software Installing the IP surveillance Software (continued) Next, the "User information" window below will appear. This window will prompt you to enter the user name and company name. Enter your user name and company name and then click "Next" to
D-Link DCS-6620G | Product Manual - Page 72
DCS-6620G User's Manual Using IP surveillance Software Installing the IP surveillance Software (continued) Select the installation directory for this application software and click "Next", which is shown in the ﬁgure below. You can change the installation directory by clicking "Browse..." Click
D-Link DCS-6620G | Product Manual - Page 73
DCS-6620G User's Manual Using IP surveillance Software Installing the IP surveillance Software (continued) After checking all the setup information in the window shown below, click "Next" to start the installation of the application software. Click Next Click "Finish", in the window shown below,
D-Link DCS-6620G | Product Manual - Page 74
DCS-6620G User's Manual Using IP surveillance Software Launcher Launcher is a controller program that allows users to invoke Monitor or Playback quickly. System Tray Icon The Launcher icon reﬂects current state of IP surveillance. The icon in the system tray signiﬁes that the IP surveillance
D-Link DCS-6620G | Product Manual - Page 75
DCS-6620G User's Manual Using IP surveillance Software Launcher (continued) When Launcher is locked, the unlock window will appear, prompting for the user password in order to unlock. The input area of the dialog will be grayed (disabled) for 60 seconds after 3 consecutive failures. User
D-Link DCS-6620G | Product Manual - Page 76
DCS-6620G User's Manual Using IP surveillance Software Launcher (continued)  Tools Contains many utilities. Currently only change password is implemented. The change password dialog looks like this:  Autorun at Startup Users out user from IP surveillance. After logging out, if the user wants to
D-Link DCS-6620G | Product Manual - Page 77
DCS-6620G User's Manual Using IP surveillance Software Monitor Program Features of the Monitor Tool Traditional Surveillance Features:  Real-time monitoring  Pan and Tilt control  Recording Special Features: The digital surveillance system supports , and manual recording for each camera. 
D-Link DCS-6620G | Product Manual - Page 78
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued ﬁguration menu for camera conﬁgurations, global settings, scheduler settings and the user information of this application software. The tips about user. You can also use convenient controls to alter the video display
D-Link DCS-6620G | Product Manual - Page 79
DCS-6620G User's Manual Using IP surveillance Software Monitor Program optical and digital zoom, auto patrol, and move the camera to a preset position.  DI/DO control This tool receives the digital input signal and sends digital output signal to the remote Video Server/ 802.11g PTZ Internet Camera
D-Link DCS-6620G | Product Manual - Page 80
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) The Admin Privilege In the monitor tool system, the admin privilege has the right to access the DCS-6620G 802.11g PTZ Internet Camera through this application software and change the local settings as well. But the
D-Link DCS-6620G | Product Manual - Page 81
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) The Layout of the Conﬁguration This section discusses the local settings for the connection and the functional conﬁguration of each camera. If you are interested in the remote settings for each camera Webpage Camera
D-Link DCS-6620G | Product Manual - Page 82
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Insert - To insert a remote 802.11g PTZ Internet Camera to the camera list. Click the "Insert" button, an "Insert New Channel" dialog will popup, as shown below. Specify the IP address, port, and admin password of
D-Link DCS-6620G | Product Manual - Page 83
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Delete - Removes the selected 802.11g PTZ Internet Camera from the camera list. Highlight the camera that you want to delete from the list and click on the "Delete" button. The selected camera will be deleted.
D-Link DCS-6620G | Product Manual - Page 84
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Alert Settings: Speciﬁc alert actions can be performed by setting the options in this window. .  Media Type You can specify which media type you want to record, Video, Audio, or both. D-Link Systems, Inc. 84
D-Link DCS-6620G | Product Manual - Page 85
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Changing the Camera Order in the List You can apply "drag and drop" in the grid area of the camera list to change the sequence of the connected Internet Cameras, which is shown below. This will enable you to
D-Link DCS-6620G | Product Manual - Page 86
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Global Settings After completing the connection for each remote 802.11g PTZ Internet Camera, we need to conﬁgure some global settings for all the cameras up in advance to keep you informed. D-Link Systems, Inc. 86
D-Link DCS-6620G | Product Manual - Page 87
DCS-6620G User's Manual Using IP surveillance Software directory The directory for storing the default and user-customized plots for the recording schedule of for your camera(s) to record to. As you move the bar to the right, more space will be available for your camera(s) and Link Systems, Inc. 87
D-Link DCS-6620G | Product Manual - Page 88
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued)  Modulation Mode You must select the input signal format (NTSC or PAL) for displaying the original resolution of video stream from DCS-6620G. If you are not sure which format to select, then leave the input signal
D-Link DCS-6620G | Product Manual - Page 89
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Backup Settings: Using Backup Settings in the global settings window, you can backup recorded data from selected cameras to a speciﬁed location.  Directory This is the directory where backup data will be saved.You
D-Link DCS-6620G | Product Manual - Page 90
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Using the Monitor Program This section depicts, in detail, how to manipulate the monitor tool. Connection of the DCS-6620G Channel: Once you have the privilege to connect to the DCS-6620G, the cameras will
D-Link DCS-6620G | Product Manual - Page 91
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Selected Channel Recording 5 Connected and monitoring 9 13 Not conﬁgured channel Configured but not connected (no video) Trashcan If you do not want to monitor one video, you can drag and drop and drop" step
D-Link DCS-6620G | Product Manual - Page 92
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Step 2: Press and hold the left mouse button, and then move the cursor to a display window in the video area, which is
D-Link DCS-6620G | Product Manual - Page 93
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Video shown Empty video box Removing video from a display window Step 1: Move the display window will disappear. All operations above are shown in the ﬁgure on the following page. D-Link Systems, Inc. 93
D-Link DCS-6620G | Product Manual - Page 94
DCS-6620G User's Manual Monitor Program (continued) Press and hold the left mouse button here. Using IP surveillance Software Move the mouse cursor dragging and dropping. 4 camera layout 1 camera layout 9 camera layout 6 camera layout 16 camera layout 13 camera layout D-Link Systems, Inc. 94
D-Link DCS-6620G | Product Manual - Page 95
DCS-6620G User's Manual Monitor Program (continued) Double click a display window to switch to a single channel layout. Using IP surveillance Software When you choose the one-camera layout or four-camera layout, the "Page up" and "Page down" buttons will be shown in the left-bottom corner of the
D-Link DCS-6620G | Product Manual - Page 96
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) To view an individual camera from the multi-camera layout upper-left corner of the video area will switch to the previous selected multi-camera layout. The position that each video channel is in for every layout will
D-Link DCS-6620G | Product Manual - Page 97
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) IP camera using arrows. Pan - Pans the camera one full cycle. Stop - Stops movement of the camera number indicates the status of the camera's DI (Digital Input). You can DI and also trigger the camera by DO switch. Set
D-Link DCS-6620G | Product Manual - Page 98
DCS-6620G User's Manual Monitor Program (continued) Alert Message Using IP surveillance Software If you have checked the box for "Enable Motion Detect" or "Enable Digital Input" on "Camera in Motion Window 2 and Motion Window 3, for camera #1. If the message "PM 02:41:56=>DI #1" is listed, that
D-Link DCS-6620G | Product Manual - Page 99
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) About By choosing "About", located in the conﬁguration menu shown below, a dialog box will appear and display the information about the installed version of IP surveillance. The information includes the software
D-Link DCS-6620G | Product Manual - Page 100
DCS-6620G User's Manual Using IP surveillance Software Monitor Program (continued) Full Screen Receiver, so that the alert messages can be reviewed. Conﬁguration Menu The menu includes Camera Conﬁguration, Global Settings, Scheduler, and About your volume settings. D-Link Systems, Inc. 100
D-Link DCS-6620G | Product Manual - Page 101
the printer icon to print the current image to your default printer. Trashcan You can drag and drop the video channel to the Trashcan to close the video connection with the DCS-6620G. Status Bar Local time Software name Current login user Login time Software version D-Link Systems, Inc. 101
D-Link DCS-6620G | Product Manual - Page 102
DCS-6620G User's Manual Using IP surveillance Software Scheduling The scheduler allows the user to schedule recordings from the selected video channel of the DCS-6620G. Through both the graphic user  Individual schedule for each video channel  Supports up to 9 preset schedule schemes for each
D-Link DCS-6620G | Product Manual - Page 103
DCS-6620G User's Manual Using IP surveillance Software Scheduling (continued) The scheduler will not be accessible until at least one camera has been added to the camera list. Go to the conﬁguration menu and click on "Scheduler" to launch the scheduler. The Layout and Functionalities Introduction
D-Link DCS-6620G | Product Manual - Page 104
DCS-6620G User's Manual Using IP surveillance Software Scheduling (continued) The layout of the scheduler is roughly divided into 4 parts:  Part 1 The ﬁrst part of the scheduler is the video channel selection area. It provides the IP addresses IP address Location D-Link Systems, Inc. 104
D-Link DCS-6620G | Product Manual - Page 105
DCS-6620G User's Manual Using IP surveillance Software Scheduling (continued) In this area you will select the video channel that you want to set a schedule for. Each video channel will display a name, IP address, and dragging with the left and the right mouse button. D-Link Systems, Inc. 105
D-Link DCS-6620G | Product Manual - Page 106
DCS-6620G User's Manual Using IP surveillance Software Scheduling (continued) Hour Time-Line In the ﬁgure below, the Hour time-line is displayed. Marking/Unmarking the in "Begin time" must be earlier than that in "End time". Otherwise the settings will not be applied. D-Link Systems, Inc. 106
D-Link DCS-6620G | Product Manual - Page 107
DCS-6620G User's Manual Using IP surveillance Software Scheduling (continued) Apply and Erase Buttons After you have selected the in which they are added when conﬁguring motion detection for the camera. For example, Window1 is the ﬁrst window added, regardless of if the name of the window
D-Link DCS-6620G | Product Manual - Page 108
DCS-6620G User's Manual Using IP surveillance Software Scheduling (continued) Digital Input In the ﬁgure above selector, it will record continuously during the schedule that is set up by the user. Secondary Schedule Secondary schedule is for recording outside of the primary schedule.The secondary
D-Link DCS-6620G | Product Manual - Page 109
DCS-6620G User's Manual Using IP surveillance Software Scheduling (continued) There are three modes in the secondary schedule: Disable, Event mode, and Continuous mode. If event mode is selected in the secondary schedule, the camera another ﬁle name instead of the default name.  Undo Click on this
D-Link DCS-6620G | Product Manual - Page 110
DCS-6620G User's Manual Using IP surveillance Software Playback Program The playback program is a very powerful, convenient, and easy way to browse the recorded video. It has one display mode (normal display mode)
D-Link DCS-6620G | Product Manual - Page 111
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Logging In Before you start the playback program, it is necessary for you to log in to the application software. The ﬁgure Area Control Area Pull Bar Area Status Area Histogram Area D-Link Systems, Inc. 111
D-Link DCS-6620G | Product Manual - Page 112
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued video in the IP surveillance database. Main Areas Display Area The display area is able to show the surveillance database of each camera by time. You Playback method Display adjustment tool D-Link Systems, Inc. 112
D-Link DCS-6620G | Product Manual - Page 113
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Histogram Area The histogram is an interactive control. Not only can you get the event and the searching range adjustment tool will be shown in the same place of the control area. D-Link Systems, Inc. 113
D-Link DCS-6620G | Product Manual - Page 114
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Pull Bar The pull bar is a fast, ﬂexible control for seeking data in the the system control tool, and the setting dialog will appear on the screen. Lock Windows Exit Settings Minimize D-Link Systems, Inc. 114
D-Link DCS-6620G | Product Manual - Page 115
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) The to export them. Exporting bitmap ﬁles will be stored in the sub-directory (camera name) under the directory you set here.  Modulation Mode: The modulation mode cannot now be normal. D-Link Systems, Inc. 115
D-Link DCS-6620G | Product Manual - Page 116
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Normal (Single Frame) Mode While in the normal (single frame) display mode, you can change the pull bar show the starting and the ending time of the interval individually (as shown above). D-Link Systems, Inc. 116
D-Link DCS-6620G | Product Manual - Page 117
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Histogram Area Dark Region Inverted region The histogram area in the normal display of the beginning time and the ending time, playback method selector, and alert area selector. D-Link Systems, Inc. 117
D-Link DCS-6620G | Product Manual - Page 118
DCS-6620G User's Manual Playback Program (continued) Location selector Period selector Using IP surveillance Software Playback method selector Alert area selector Location Selector The location selector is a control that lets you select the camera will be displayed. D-Link Systems, Inc. 118
D-Link DCS-6620G | Product Manual - Page 119
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) settings dialog. The alert area selector will be changed to alert window 0 by default settings when you change the location selector to another window. Play Control For the display mode. D-Link Systems, Inc. 119
D-Link DCS-6620G | Product Manual - Page 120
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Speed Indicator Play Pause Forward Stop  Play The supported "Play" button is an intelligent play user the start point will be reset to the start of the and Slow Play The camera supports a maximum of x16
D-Link DCS-6620G | Product Manual - Page 121
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Display Adjustment Tool When you move the mouse cursor to the displaying area, the display adjustment toolbox will appear. Using the display
D-Link DCS-6620G | Product Manual - Page 122
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Full composed of its own three elements, i.e. "Zoom In", "Zoom Out", and "Full Range." Zoom In Each time you click on the "Zoom In" button in the searching range adjustment ned start time. D-Link Systems, Inc. 122
D-Link DCS-6620G | Product Manual - Page 123
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Zoom Out Each time you click on the "Zoom Out" button in the searching range adjustment toolbox, the displayed time period the main window, you need to re-enter the admin's password again. D-Link Systems, Inc. 123
D-Link DCS-6620G | Product Manual - Page 124
DCS-6620G User's Manual Using IP surveillance Software Playback Program (continued) Settings The settings dialog will pop up when you click the "Settings" button. For window. Exit The playback program will be closed immediately when you click on the "Exit" button. D-Link Systems, Inc. 124
D-Link DCS-6620G | Product Manual - Page 125
DCS-6620G User's Manual Schedule Video Recording with Motion Detection Schedule Video Recording with Motion Detection To schedule video recording with motion detection, you must ﬁrst enable motion detection on the 802.11g PTZ Internet Camera. Click the Motion Detection button under the Advanced
D-Link DCS-6620G | Product Manual - Page 126
DCS-6620G User's Manual Schedule Video Recording with Motion Detection Click Scheduler In the Primary Schedule you can choose either Once (for one To schedule video recording with motion detection, you can use either the Primary Schedule or Secondary Schedule, or both. D-Link Systems, Inc. 126
D-Link DCS-6620G | Product Manual - Page 127
DCS-6620G User's Manual rst create motion detection windows in the Web conﬁguration page of the camera. Remember the names of the windows and the order in which you IP surveillance or can be used as a backup if you need to re-install the IP surveillance software program. D-Link Systems, Inc. 127
D-Link DCS-6620G | Product Manual - Page 128
DCS-6620G User's Manual Frequently Asked Questions Frequently Asked Questions 802.11g PTZ Internet Camera Features Q: What is an 802.11g PTZ Internet Camera? A: The 802.11g PTZ Internet Camera is a stand-alone system connecting directly to an Ethernet, Fast Ethernet, or wireless network. It
D-Link DCS-6620G | Product Manual - Page 129
IP addresses? A: The 802.11g PTZ Internet Camera can be connected to a LAN with private IP addresses. Q: Can the 802.11g PTZ Internet Camera be installed and work if a ﬁrewall exists on the network? A: If a ﬁrewall exists on the network, port 80 is open for ordinary data communication. The DCS-6620G
D-Link DCS-6620G | Product Manual - Page 130
DCS-6620G User's Manual Frequently Asked Questions Q: I connected the 802.11g PTZ Internet Camera directly to a computer with a cross-over cable Ethernet cable and received the following Windows error upon running the Installation Wizard: A1: This Windows error will occur if the 802.11g PTZ
D-Link DCS-6620G | Product Manual - Page 131
command but ﬁrst you must disconnect the 802.11g PTZ Internet Camera from the network. Start a DOS window. Type ping x.x.x.x, where x.x.x.x is the IP address of the 802.11g PTZ Internet Camera. The replies, as illustrated below, will help diagnose any connection problems. D-Link Systems, Inc. 131
D-Link DCS-6620G | Product Manual - Page 132
socket. It is used to reset the system or restore the factory default settings. Sometimes resetting the DCS-6620G will return the system back to a normal state. If the system still has problems after reset, restore the factory settings and install again: RESET: 1. Lightly insert a paper clip (or
D-Link DCS-6620G | Product Manual - Page 133
DCS-6620G User's Manual External I/O Port External I/O Port External I/O Port Deﬁnition for the 802.11g PTZ Internet Camera The DCS-6620G provides a general I/O terminal block with one digital input and one relay set DO to ON) OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC) D-Link Systems, Inc. 133
D-Link DCS-6620G | Product Manual - Page 134
DCS-6620G User's Manual External I/O Port The above diagram shows a typical wiring conﬁguration for a normally closed PIR motion sensor. Please refer to your speciﬁc motion sensor for the power supply connection to the device since this will be critical to the success of your installation. Note
D-Link DCS-6620G | Product Manual - Page 135
DCS-6620G User's Manual External I/O Port Conﬁguring Your Camera for External Trigger Based Recording (continued) Click the Mail & FTP button under the Advanced tab to set the SMTP or FTP server settings for the DCS-6620G. Click Mail & FTP In this window, enter the settings for the SMTP or FTP
D-Link DCS-6620G | Product Manual - Page 136
DCS-6620G User's Manual External I/O Port Conﬁguring Your Camera for External Trigger Based Recording (continued) Next, click the Applications button under the Tools tab to set the application settings for the DCS-6620G recording, to your e-mail account or FTP server. D-Link Systems, Inc. 136
D-Link DCS-6620G | Product Manual - Page 137
DCS-6620G User's Manual Technical Specifications Technical Specifications Remote management Configuration and system log can be accessed via Web browser, using Internet Explorer 5.X and above, and FTP application remotely Networking Protocol TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS, and DHCP
D-Link DCS-6620G | Product Manual - Page 138
DCS-6620G User's Manual Technical Speciﬁcations LED indicator 2 Status indicators: 1) Power, 2) POST, connection, and heartbeat Camera speciﬁcation Protocol ActiveX Operating system Microsoft Windows® XP or 2000 Browser Internet Explorer 6.x or above Environmental Operating 40OF to 113OF Storage
D-Link DCS-6620G | Product Manual - Page 139
DCS-6620G User's Manual Contacting Technical Support Contacting Technical Support Technical Support You can ﬁnd software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the
D-Link DCS-6620G | Product Manual - Page 140
DCS-6620G User's Manual Time Zone Table Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from. D-Link Systems, Inc. 140
D-Link DCS-6620G | Product Manual - Page 141
DCS-6620G User's Manual Time Zone Table D-Link Systems, Inc. 141
D-Link DCS-6620G | Product Manual - Page 142
DCS-6620G User's Manual Warranty Warranty D-Link Systems, Inc. 142
D-Link DCS-6620G | Product Manual - Page 143
DCS-6620G User's Manual Warranty D-Link Systems, Inc. 143
D-Link DCS-6620G | Product Manual - Page 144
DCS-6620G User's Manual Warranty D-Link Systems, Inc. 144
D-Link DCS-6620G | Product Manual - Page 145
DCS-6620G User's Manual Registration Registration 05/03/05 D-Link Systems, Inc. 145

Match case Limit results 1 per page